701/702

Users Manual

Damping (smoothing of the last several readings).

Display of measurements in engineering units or percent of scale.

Data logging (Model 702 only).

Features available in SOURCE mode:

An output ramp feature for testing limit switches. Trip detect is either a 1V change or a continuity status change (Open or Short) from one ramp increment to the next.

An output step feature in which you set the step size and press uor dto step the output in engineering units or percent of scale.

Unless stated otherwise, everything in this manual applies to both the Fluke 701 and 702 Documenting Process Calibrators. For maintenance, repair, performance testing, and calibration instructions, order the 701/702 Service Manual (PN 944525). The phone number in the USA and Canada for replacement parts is: 1-800-526-4731. For service help in the USA and Canada call 1-800-825-9810. For application or operation assistance on Fluke products call:

800-44-FLUKE (800-443-5853) in USA and Canada

(31 40) 644200 in Europe

(206) 356-5500 from other countries

2

Page 12
Image 12
Fluke Rev. 4 user manual 701/702