Documenting Process Calibrator
Setting Up the Calibrator
3.Use the u and dkeys to move the cursor to the parameter you want to change, then press eor the Choices softkey to choose a setting for that parameter. For example, the following display appears after you select Date Format:
4.Press uor d to move the cursor to the desired date format.
5.Press eto go back to the sdisplay.
6.Make another selection or press the Done softkey or sto save your settings and exit smode.
Using the Backlight
Press Cto turn on the display backlight. Press C again to turn it off. When the backlight is on, the
Gsymbol shows at the top of the display. If desired, you can minimize battery usage by setting the calibrator to turn the display backlight off automatically. When the backlight is turned on and
25
