701/702
Users Manual
CAUTION
To avoid damaging the plastic lens and case, do not use solvents or abrasive cleansers.
Calibration Data
The date of last calibration shows on the calibration sticker and on the last screen in smode. The CAL. STATUS number on the sticker should always match the Calibration Status number in the calibration sscreen. Calibration of the 701 and 702 is to be done by qualified personnel.
Service Center Calibration or Repair
Calibration, repairs, or servicing not covered in this manual should be performed only at an authorized Fluke Service Center. If the calibrator fails, check the
Verify that the calibrator is being operated in accordance with the instructions in this manual. If the calibrator is faulty, send a description of the failure with the calibrator. Pressure modules do not need to accompany the calibrator unless the module is faulty
also. Be sure to pack the calibrator securely, using the original shipping container if it is available. Send the equipment postage paid and insured, to the nearest Service Center. (Refer to the list of Service Centers which follows.) Fluke assumes no responsibility for damage in transit.
A Fluke 701 or 702 calibrator covered by the warranty will be promptly repaired or replaced (at Fluke’s option) and returned to you at no charge. See the back of the title page for warranty terms. If the warranty period has expired, the calibrator will be repaired and returned for a fixed fee. If the calibrator or pressure module is not covered under the warranty terms, contact one of the Fluke Service Centers listed at the back of this manual for a price quote for repair.
Replacement Parts
Table 9 lists the
84
