Fluke Rev. 4 user manual Memory Operations, Saving Results, 701/702

701/702

Users Manual

Memory Operations

Saving Results

As Found/As Left test results are automatically saved at the end of each test routine. Any other time during MEASURE, SOURCE, or MEASURE/SOURCE you can press the Save softkey to save the data on the display for later review.

After you press Save, the calibrator saves the information on the display and shows a saved result index number, the date and time, and the cumulative percentage of memory used, as in the following display:

You can quit at this point. Or, if you want to add information to the saved data, the calibrator has a way for you to do so. If you press the Continue softkey, the display prompts you to enter the instrument tag identifier (Tag), instrument serial number (Ser#), and operator name (ID), as shown in the following display:

68