Fluke Rev. 4 user manual Documenting Process Calibrator, Introduction, Function, Measure, Source

Documenting Process Calibrator

Introduction

Table 1. Summary of Source and Measure Functions

FUNCTION

vdc V h ac V h Frequency qResistance mdc Current qContinuity

MEASURE

0 to ±300V

0 to 300V rms, 20 Hz to 5 kHz

1 Hz to 50 kHz, 110 mV to 300V rms

0Ω to 11 kΩ

0 to 110 mA

Beep and the word Short indicates continuity

SOURCE

0 to 11V in V or mV units (10 mA max)

No sourcing

1 mV to 10V pk square wave, 2 Hz to 50 kHz

0Ω to 11 kΩ

0 to 22 mA (28V max)

No sourcing

tThermocouple

tRTD

Measure 2,3, or 4 wire.

Source 2 Wire.

E, N, J, L, K, T, U, B, R, S, or C

100Ω Platinum (3926)

100Ω Platinum (385)

120Ω Nickel (672)

200Ω Platinum (385)

500Ω Platinum (385)

1000Ω Platinum (385)

10Ω Copper (427)

100Ω Platinum (3916)

pPressure

14 modules ranging from 0 to 10” H20 (2.5 kPa) to 0 to 10,000 psi (69,000 kPa)

Note

sLoop Power	24 or 28V	(22 mA max)
Note: Use an external hand pump or other pressure source as a pressure		stimulus for the source pressure function.

3