
Documenting Process Calibrator
Setting Up the Calibrator
| BATTERY ACCESS |
|
1 | BATTERY ACCESS | 2 |
BATTERY ACCESS
3
4
Battery Life
Table 4 shows the operating time for a new, fully charged battery pack. Calibrator performance is guaranteed to meet specifications until the low battery annunciator blocated at the top right side of the display appears and the beeper beeps every 4 seconds. When the bannunciator appears, stop using the calibrator and charge the battery. If you have a fully charged spare battery, exchange it with the low battery.
The battery is useful for up to 1,000 charge/discharge cycles. If you need to replace the battery, refer to “Replacing the Battery” later in this manual for instructions. For longest battery life and best performance, wait for bto appear before you charge the battery.
Figure 8. Removing the Battery and Using the Charger
21