Documenting Process Calibrator
Introduction
The accessories listed below and shown in Figure 2 are available from Fluke:
∙Pressure Modules, Fluke model numbers listed below. (Differential models also operate in gage mode.)
700P01: 0 to 10 inches of H2O, or 2.5 kPa (differential nonisolated)
700P02: 0 to 1 psi (differential, nonisolated)
700P03: 0 to 5 psi (differential, nonisolated)
700P04: 0 to 15 psi (differential, nonisolated)
700P22: 0 to 1 psi (differential, isolated)
700P23: 0 to 5 psi (differential, isolated)
700P24: 0 to 15 psi (differential, isolated)
700P05: 0 to 30 psi (gage, isolated)
700P06: 0 to 100 psi (gage, isolated)
700P07: 0 to 500 psi (gage, isolated)
700P08: 0 to 1000 psi (gage, isolated)
700P29: 0 to 3000 psi (gage, isolated)
700P30: 0 to 5000 psi (gage, isolated)
700P31: 0 to 10000 psi (gage, isolated)
∙Model BE9005 Series Battery Eliminator for
∙PMLink software and cable for developing procedures and transferring procedures and data (for Model 702 only).
∙Model BP7217
∙Service Kit.
∙C700 Carrying Case.
7
