Panasonic DMC-LZ10, DMC-LZ8 operating instructions Inserting/Removing the Batteries/Card Optional

Preparation

Inserting/Removing the Batteries/Card (Optional)

•Check that the camera is turned off.

•Use alkaline batteries (supplied), Ni-MH batteries (optional) or oxyride batteries (optional).

•Prepare a card.

•You can record or play back pictures on the built-in memory when you are not using a card. (P16)

1￿ Slide the battery door A or the card door B to open it.

1 2

A 1	B
	2
	3

Press and keep the lever down and slide the door.

2￿ Batteries:

Insert the batteries with the ( and ) poles aligned correctly.

Card:

Insert the card with the label side facing the back of the camera until it clicks and locks.

To remove the card, push the card until it clicks, then pull the card out upright.

•The card may be damaged if it is not fully inserted.

3￿ 1Close the battery door or the card door.

2Slide the battery door or the card door to the end and then close it firmly.

1

12

•If the card door cannot be completely closed, remove the card, check its direction and insert it again.

•Select the battery type being used in [BATTERY TYPE] in the [SETUP] menu. (P21)

•Remove the batteries after use.

•Remove the batteries after the LCD monitor and the status indicator (green) turn off. Otherwise, the settings on the camera may not be stored properly.

•Do not remove or insert the batteries or the card while the unit is on, particularly while accessing the built-in memory or the card. This can damage data.

•We recommend using Panasonic’s SD Memory Card/SDHC Memory Card.

•Do not touch the connection terminals on the back side of the card.

15

VQT1L86