Panasonic DMC-LZ8, DMC-LZ10 operating instructions Press MENU/SET to close the menu

Advanced-Shooting

•fps (frame per second); This refers to the number of frames used in 1 second.

•You can record smoother motion pictures with 30 fps.

•You can record longer motion pictures with 10 fps although the picture quality is lower.

•[10fpsQVGA]:

The file size is smaller, so the files are suitable to be attached to e-mails.

*Set [ASPECT RATIO] to [h] and the [PICTURE MODE] to [30fpsQVGA] or [10fpsQVGA] (320 × 240 pixels) when you record motion pictures to the built-in memory.

6￿ Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to close the menu.

•When you use the optical image stabilizer function, only [MODE1] is available in motion picture mode.

•Refer to P123 for information about the available recording time.

•The remaining recordable time shown on the LCD may not reduce regularly.

•This camera cannot take motion pictures if you are using a MultiMediaCard.

•When [PICTURE MODE] is set to [30fpsVGA] or [30fps16:9], we recommend that you use cards offering “10 MB/s” or higher speeds (printed on their packages and elsewhere) for best results.

•Depending on the type of SD Memory Card or SDHC Memory Card, recording may stop in the middle.

•We recommend using Panasonic’s SD Memory Card/SDHC Memory Card.

•Depending on the type of card you are using, the card access indication may appear for a while after shooting motion pictures. This is normal.

•The volume of motion picture is limited to 2 GB per recording session. The maximum available recording time for up to 2 GB only is displayed on the screen.

•When motion pictures recorded with this camera are played back on other equipment, the quality of pictures may be deteriorated or it may not be possible to play them back. Also the recording information may not be displayed correctly.

•When the brightness of the subject is changed, the lens operation noize may be recorded.

•In motion picture mode [i] the following functions cannot be used.

–Direction detection function

–[MODE2] on the optical image stabilizer function

–[ ] (face detection) on the AF mode

62

VQT1L86