Panasonic DMC-LZ8, DMC-LZ10 operating instructions Troubleshooting, 114

Others

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu while the camera is in the recording mode. (P23)

■Batteries and power supply

Conditions	Causes
The camera turns off	The remaining battery power may not be displayed
immediately even when	accurately, and the camera may suddenly stop working, when
battery power is full.	the type of battery and the settings on [BATTERY TYPE] are
The remaining battery	not identical. However this is not a malfunction. Depending
power is low even if new	on the battery brand and the operating temperature, or if
batteries are inserted.	exhausted batteries are used, the remaining battery power
	may not be displayed accurately.
	Please check [BATTERY TYPE] (P21) in the [SETUP] menu.
The camera will not turn	Are the batteries inserted correctly?
on.	Use sufficiently charged batteries when using Ni-MH
	batteries.
The picture is not	Is the economy mode (P22) activated? Press the shutter
displayed on the LCD	button halfway to deactivate these modes.
monitor.	Are the batteries exhausted? Replace them with batteries
	which have sufficient capacity. (When you use Ni-MH
	batteries, charge them.)
The camera turns off	• Are the batteries exhausted? Replace them with batteries
soon after turning it on.	which have sufficient capacity. (When you use Ni-MH
	batteries, charge them.)
	• If you leave the camera on, the battery will be exhausted.
	Turn the camera off frequently by using economy mode
	(P22) etc.
■ Shooting

Conditions	Causes
The picture cannot be	Is the mode correctly set?
recorded.	Is there any memory capacity left on the built-in memory or
	the card?
	Before recording, delete some pictures. (P38)
The recorded pictures	The picture can become whitish if there is dirt e.g. fingerprints
are pale.	on the lens. If the lens is dirty, turn on the camera, eject the
	lens barrel and gently wipe the lens surface with a soft dry
	cloth.
The recorded picture is	Check that the exposure is correctly compensated. (P48)
too bright or dark.
2 or 3 pictures are taken	Is auto bracket (P49), [HI-SPEED BURST] (P60) or burst
at one time.	(P75) mode set?

114

VQT1L86