Panasonic DMC-LZ8, DMC-LZ10 operating instructions Making the LCD monitor easier to see LCD mode

Advanced-Shooting

Making the LCD monitor easier to see (LCD mode)

1￿ Press and hold [Q.MENU] until quick setting screen is displayed.

Q.MENU

2￿ Select indication at the right end (initial setting: [ ]) using q, select mode using e/r and press [MENU/SET].

2 AWB AUTO 10M

		MENU
SELECT	EXIT MENU	SET

42

Mode	Uses
	Brightness of the LCD
AUTO	monitor automatically
POWER LCD changes depending
	on brightness of the
	environment.
	The LCD monitor becomes
POWER	brighter and easier to see
LCD	even when taking pictures
	outdoors.
	This is useful
HIGH	when you cannot
ANGLE	get close to the
	subject because
	there is a person
	in the way.
	(More difficult to
	see when looked
	straight on.)
	The LCD monitor returns to
	the normal brightness.

•You can set LCD mode in setup menu. (P21)

•High angle mode is canceled if you turn the camera off. (Same occurs in [POWER SAVE].)

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in power LCD mode. Press any button to make the LCD monitor bright again.

•The brightness of the pictures displayed on the LCD monitor is adjusted when power LCD mode or high angle mode is activated. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•The number of recordable pictures decreases when the auto power LCD, power LCD or high angle mode is used.

VQT1L86