Panasonic DMC-LZ8, DMC-LZ10 operating instructions LCD Monitor and Changes to the Display

Preparation

LCD Monitor and Changes to the Display

■Display in program AE mode []. (at the time of purchase)

	1	2	3	4	5	6	7
14	P				10M			8
	2						3
13								9
								10
			F3.3		1/30		ISO
							100

12 11

1￿ Recording mode

2￿ Flash mode (P43)

•The flash icon turns red when activating the flash and pressing the shutter button halfway.

3￿ AF area

•The AF area displayed is bigger than usual when taking pictures in dark

places.

4￿ Focus (P27)

5￿ Picture size (P68)

6￿ Quality (P68)

7￿ Battery indication

•The battery indication turns red and blinks. (The status indicator blinks when the LCD monitor is turned off.)

Replace with new batteries or fully charged Ni-MH batteries.

8￿ Remaining number of recordable pictures (P120)

9￿ Recording indication

10￿Built-in memory / Card

( or lights red during accessing.)

•Do not do the following when the access indication lights.

–Turn the camera off.

–Remove the batteries or the card .

–Shake or impact the camera.

–Disconnect the AC adaptor (optional).

•Observe the above caution also when pictures are being read or deleted or the built-in memory (or the card) is being formatted.

•The access time for the built-in memory may be longer than the access time for a card. (Max. about 7 sec.)

11￿Shutter speed (P30)

12￿Aperture value (P30)

•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when the flash is activated.)

13￿Metering mode (P72)

14￿Optical image stabilizer (P76)

•For details about other displays, refer to P108.

■Changing the display

Press [DISPLAY] to change the display. Choose whether to display information such as the number of pixels and possible number of images for recording while you are shooting. For details, refer to P40.

26

VQT1L86