Panasonic DMC-LZ10, DMC-LZ8 101, Folder composition, Connection in the PTP mode

Connecting to other equipment

■Motion picture playback on a PC Use “QuickTime” (for Windows 2000/XP/ Vista) in the supplied CD-ROM when you play back motion pictures recorded on this camera on your PC.

• Download [QuickTime6.5.2 for Windows] from the following website and install it on your PC when you use Windows98/ 98SE/Me. http://www.apple.com/support/ downloads/quicktime652forwindows.html

• The software is a standard Macintosh feature.

■Folder composition

Folders appear as follows.

• Built-in	DCIM					100_PANA
		100_PANA					1
memory
				P1000001.JPG
• Card
			2		3
				P1000002.JPG
				P1000999.JPG
		101_PANA
		999_PANA
	MISC

1Folder number

2 File number

3 JPG : Pictures

MOV : Motion pictures

MISC: Folder containing files with following settings

DPOF print Favorite

•This unit stores up to 999 picture files in each folder. A new folder is created after this maximum is reached.

•To reset file and folder numbers, use [NO.RESET] in the setup menu. (P23)

■Conditions under which a different folder number is used

In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number.

•The folder containing the picture you just shot had a file numbered 999 in it (example: P1000999.JPG).

•When the card just recorded to contains, for example, a folder with the number 100 (100_PANA) in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker) and then a picture is recorded.

•You start shooting again after using [NO.RESET] in the setup menu. (It is recorded to a new folder that has a number following on from the one previous. You can also reset the folder number to 100 by using [NO.RESET] immediately after formatting the card when there are no folders or pictures on the card.)

■Connection in the PTP mode

If the OS is “Windows XP”, “Windows Vista” or “Mac OS X”, you can connect in PTP mode if you set the camera to [PictBridge (PTP)] and press [MENU/SET] after connecting the USB cable.

•You can only load pictures from the camera and cannot write them on the card or delete them.

However, you can connect in MTP mode on Windows Vista, instead of PTP. Then, you can format or delete the data on the card.

•When there are 1000 or more pictures on a card, the pictures may not be imported.

101

VQT1L86