Panasonic DMC-LZ10, DMC-LZ8 Connecting to a PictBridge-compliant Printer, 103

Connecting to other equipment

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor. Make the necessary settings on your printer beforehand. (Read your printer’s operating instructions.)

1￿ Turn on the camera and the printer.

2￿ Connect the camera to a printer via the USB connection cable A (supplied).

•The screen to select [PictBridge (PTP)] or [PC] is displayed.

•If [USB MODE] in setup menu is set to other than [SELECT ON CONNECTION], the screen is not displayed (P23).

AV OUTD

DIGITAL

A

C

B

AUSB connection cable (supplied)

•Connect the USB connection cable with the [c] mark facing the [q] mark on the [DIGITAL] socket.

BAC adaptor (DMW-AC6PP: optional) C DC coupler (DMW-DCC2: optional)

•Use batteries with sufficient battery power or the AC adaptor B and the DC coupler C.

•Always use a genuine Panasonic AC adaptor (DMW-AC6PP: optional) and DC coupler (DMW-DCC2: optional).

•Make sure the camera is off before connecting or disconnecting the AC adaptor.

DCheck the facing of the connector and push straight in.

•Hold D and then insert or pull the USB connection cable straight. Do not try to force the connector in backwards or sideways. This can damage this unit and the equipment you are connecting.

3￿ Select [PictBridge] using e and press [MENU/SET].

•Do not use any other USB connection cables except the supplied one.

•If a card is not inserted when the camera is connected to the printer, you can print the picture data on the built-in memory.

If a card is inserted, you can print the picture data on it.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•To print the name or the age in [BABY] and [PET] in scene mode, the departure date for [TRAVEL DATE] or the text input in [TITLE EDIT], use the [PHOTOfunSTUDIO-viewer-] software in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions (PDF file) of the software.

•To find out more about PictBridge compliant printers, contact your local dealer.

103

VQT1L86