Panasonic DMC-LZ10, DMC-LZ8 operating instructions Playing Back Pictures with a TV Screen, 107

Connecting to other equipment

Playing Back Pictures with a TV Screen

■Playing back pictures using the AV cable (supplied)

•Set the [TV ASPECT]. (P23)

•Turn the camera and the TV off.

• Do not use any other AV cables except

the supplied one.

• The top and bottom or left and right of

the picture may be cut off slightly when

it is displayed due to the characteristics

of the TV.

• Read the TV operating instructions too.

• Pictures might be slightly blurred if you

show them vertically on a television.

• Set the volume of this unit to 0 when

AV OUT

12

outputting audio.(P21)

• You can view pictures on TVs in other

DIGITAL

B

A

1￿ Connect the AV cable A (supplied) to the [AV OUT] socket of the camera.

•Connect the AV cable with the [c] mark facing the [q] mark on the [AV OUT] socket.

•Hold B and then insert or pull the AV cable straight.

2￿ Connect the AV cable to the video input and the audio input sockets on the TV.

1Yellow: to the video input socket

2 White: to the audio input socket

3￿ Turn the TV on and select external input.

4￿ Turn the camera on and playback the picture.

countries (regions) which use the NTSC

or PAL system when you set [VIDEO

OUT] in the [SETUP] menu. Even if you

set [VIDEO OUT] to [PAL], the output

signal will still be NTSC in the recording

mode.

■Playback pictures on TV with SD Memory Card slot

You can put your SD Memory Card in a television with an SD Memory Card slot to show still images.

•Depending on the television, some pictures may not take up the whole screen.

•You cannot play motion pictures. To play back motion pictures, connect the camera to the TV with the AV cable (supplied).

•You can use SDHC Memory Card only on SDHC Memory Card compatible TV.

•You may be unable to play MultiMedia Cards.

107

VQT1L86