Panasonic DMC-LZ10, DMC-LZ8 To change mode, Aperture-priority AE setting value

Advanced-Shooting

■To change mode

Press [MENU/SET], select mode with e/r and press [MENU/SET] again.

You can move to the recording menu or SETUP menu. Select [A/S/M] icon with w and select [] (Recording menu) or [] (SETUP menu) with r.

■Aperture-priority AE setting value

Aperture value	Shutter speed
setting (with 1/3 EV
	setting (sec.)
step)
F3.5, F3.3	8 to 1/1000
F5.0, F4.5, F4.0	8 to 1/1300
F7.1, F6.3, F5.6	8 to 1/1600
F8.0	8 to 1/2000

■Shutter-priority AE setting value

Shutter speed	Aperture value
setting value (sec.)
	setting
(with 1/3 EV step)
8, 6, 5, 4, 3.2, 2.5,
2, 1.6, 1.3, 1, 1/1.3,
1/1.6, 1/2, 1/2.5,
1/3.2, 1/4, 1/5, 1/6,
1/8, 1/10, 1/13, 1/15,
1/20, 1/25, 1/30,	F3.3 to F8.0
1/40, 1/50, 1/60,
1/80, 1/100, 1/125,
1/160, 1/200, 1/250,
1/320, 1/400, 1/500,
1/640, 1/800, 1/1000
1/1300	F4.0 to F8.0
1/1600	F5.6 to F8.0
1/2000	F8.0

•Each setting value is the one shown at the end of Zoom W. Depending on the zoom position, some values cannot be selected.

•The LCD brightness may differ from the brightness for actual pictures taken. Playback and confirm.

•If optimum exposure cannot be achieved, the aperture value and shutter speed value turn to red.

•Using tripod is recommended when the shutter speed is slow.

•When shutter-priority AE is set, you cannot make the following settings.

–Flash: Slow sync./Red-eye reduction

–Intelligent ISO

•When manual exposure is set, you cannot make the following settings.

–Flash: Slow sync./Red-eye reduction

–Intelligent ISO

–Compensating exposure (P48)

•If you set the ISO sensitivity to [AUTO] while manual exposure mode, the camera automatically selects [ISO100].

■Manual exposure setting value

Aperture value	Shutter speed
setting (with 1/3 EV	setting (sec.) (with
step)	1/3 EV step)
F3.3 to F3.5	60 to 1/1000
F4.0 to F5.0	60 to 1/1300
F5.6 to F7.1	60 to 1/1600
F8.0	60 to 1/2000

51

VQT1L86