TOC | INDEX |
Intensity
The Intensity setting will control the amount of ink saturation on the disc. When printing onto the Primera TuffCoat discs, 96% is usually sufficient. When printing on to other brands of media, or if you would like to print darker colors, you may wish to increase the Intensity setting.
Inner Diameter
The inner diameter refers to the size of the
−23 mm for Primera's
−24.9 mm for the Hockey Rink Disc, Business Card Disc and 80mm CD
Outer Margin
The Outer Margin refers to where the printing will cut off around the outer edge of your disc. The size of the printable surface can vary from one type of media to the next. This allows you to set the outer margin in millimeters allowing you to print all the way to the edge regardless of the type of disc you are using. The outer margin for Primera's TuffCoat Media should be set to 0.7mm.
Save As Default
The Save As Default button will save the current settings as the
Restore Defaults
The Restore Defaults button will restore the driver settings to the factory defaults.
Config Utility
This button launches the Configuration Utility. This Utility is also available browsing to Hard Drive - Library - Printers - Primera - DiscPublisherProXi - DiscPublisherProXiconfig. This utility is used to report ink levels, clean and change ink cartridges, and align your
Creating Discs 47