27
REPLACEMENTS
Contact your dealer for questions concerning prices and avail- | 1. | MODEL & SERIAL NUMBER OF FIREPLACE |
ability of replacement parts. Normally all parts can be ordered | 2. | INSTALLATION DATE OF FIREPLACE |
through your Napoleon® dealer or distributor. | 3. | PART NUMBER |
When ordering replacement parts always give the following | 4. | DESCRIPTION OF PART |
information: | 5. | FINISH |
FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF
THE ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR
THE CLAIM.
REPLACEMENT PARTS
#PART NO. DESCRIPTION
1 | OUTER ROCKS | |
2 | SINGLE ROCK | |
3 | BOWL | |
4 | ROCK SET ASSEMBLY | |
5 | WIRE MESH | |
6* | DOOR LATCH (EA) |
7
7
8* | NATURAL GAS ORIFICE #43 | |
8* | PROPANE GAS ORIFICE #54 |
9
10
11
12W010- 1194 NATURAL GAS PILOT ASSEMBLY
13W010- 1201 PROPANE GAS PILOT ASSEMBLY
14* | NG PILOT INJECTOR | |
14* | LP PILOT INJECTOR | |
15* | NAPOLEON® LOGO |
16
17
18 | GD 552 | BLOWER |
19 | SPARK SWITCH | |
20 | TRANSMITTER | |
21 | RECEIVER |
22
23
24
25
26
27* | INSULATION SLEEVE | |
28 | DOOR | |
29* | RESTRICTOR | |
30* | GLASS W/ GASKET |
*IDENTIFIES ITEMS WHICH ARE NOT ILLUSTRATED. FOR FURTHER INFORMATION, CONTACT YOUR NAPOLEON®
DEALER.
FLEXIBLE VENT KITS
GD220 (5 FT)
31* | 4” FLEXIBLE ALUMINIUM LINER | |
|
| - (5 FT) C/W SPACERS |
31* | 7” FLEXIBLE ALUMINIUM LINER - (5 FT) |
GD330 (10 FT)
32* | 4” FLEXIBLE ALUMINIUM LINER | |
|
| - (10 FT) C/W SPACERS |
32* | 7” FLEXIBLE ALUMINIUM LINER - (10 FT) | |
33* | WALL SUPPORT ASSEMBLY |
TERMINAL KITS
34 | PERISCOPE |
| - GD201 |
35 | WALL TERMINAL KIT | - GD222R | |
|
|
| |
| ROOF TERMINAL KITS |
| |
36* | 1/12 TO 7/12 PITCH | - GD110 | |
37* | 8/12 TO 12/12 PITCH | - GD111 | |
38* | FLAT ROOF |
| - GD112 |
39 | 4/7 INNER/OUTER SLEEVE |
| |
40 | 4/7 TERMINAL |
| |
41 | STORM COLLAR |
| |
42 | ROOF SUPPORT |
| |
43
|
| ACCESSORIES |
44* | ||
45 | GD501 | HEAT GUARD |
46 | HOT AIR DISTRIBUTION KIT | |
47* | HOT AIR EXHAUST KIT | |
48 | EXTENSION KIT, 5FT FLEX VENT | |
49* | WALL SUPPORT ASSEMBLY | |
50* | 4” COUPLER | |
51* | 7” COUPLER | |
52* | CONVERSION KIT - NG TO LP | |
53* | CONVERSION KIT - LP TO NG | |
54 | RFK82 | RECTANGLE FACING KIT |
55 | AFK82 | ARCHED FACING KIT |
56* | RFK82WI | WROUGHT IRON FACING KIT |
NOTE: Care must be taken when removing and disposing of any broken glass or damaged components. Be sure to vacuum up and broken glass from inside the fi replace before operation.
Installation and repairs must be performed by a qualifi ed installer, service agency or the supplier.
**WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
**WARNING: This is a fast acting thermocouple. It is an integral safety component. Replace only with a fast acting ther- mocouple supplied by Wolf Steel Ltd.