Philips 196E3L user manual Safety precautions and maintenance, Operation

Page 3

1. Important

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor.

It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the monitor panel.When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

o Temperature: 0-40°C 32-95°F

o Humidity: 20-80% RH

1

Image 3
Contents 196E3L Table of Contents Safety precautions and maintenance Temperature 0-40C 32-95F Humidity 20-80% RHOperation Notational Descriptions Weee Setting up the monitor Installation Package contentsColumn Setting up the monitor Main menu Sub menu Basic and simple instruction on the control keysResolution notification Remove the Base How does it work? SmartImage Lite What is it?Why do I need it? Image OptimizationWhy do I need it? Philips SmartControl Lite Start with Standard pane Adjust menu Color menu Next goes to the succeeding target 6-targets On single input displays, this pane will not be visible Task Tray Menu Enabled Task Tray Menu DisabledExit Close SmartControl Lite YES Technical SpecificationsTFT-LCD LEDPower On mode typical 13.92W Energy Consumption WxHxD Box dimension WxHxDProduct without stand Rohs YES Epeat Mtbf30,000 hrs Environmental720x400 Power Management Automatic PowerSavingAutomatic power saving feature Regulatory Information Reorient or relocate the receiving antenna Federal Communications Commission FCC Notice U.S. OnlyFCC Declaration Commission Federale de la CommunicationPlassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusAchtung Beim Aufstellen Ergonomie Hinweis nur DeutschlandTypes of Pixel Defects Customer care and warrantyPhilips Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsAdjacent dark subpixels Black Dot DefectsTotal bright dot defects of all types Dark subpixelAsia Latin AmericaNorth America PacificWhat is excluded? €0,09 Your Guarantee in Central and Eastern Europe Bulgaria Fujitsu Services OUBelarus IBALatvia Hungary SlovakiaSlovenia PC HandArgentina BrazilCompany See ASP-BRZ Tel 55 11 Email moacir.minozzo@aoc.com.brASC Bali ASC MedanASC Yogya ASC SurabayaCustomer care and warranty WHO is COVERED? What is COVERED? Where can I GET More INFORMATION? What is EXCLUDED?Your warranty does not cover Where is Service AVAILABLE?To GET Warranty Service in Canada Your International Guarantee Dear Customer Troubleshooting & FAQs TroubleshootingNo Picture Power LED not lit Green, red, blue, dark, and white dots appears on the screen Power on light is too strong and is disturbingRun Windows Update and updated monitor and/or video driver SmartControl Lite FAQsIcm? Q4 How do I adjust the resolution? Q10 Can I connect my monitor to any PC, workstation or Mac? Q7 How should I clean the monitor surface?Color TemperatureThe 2 settings are 6500K, and 9300K Q9 Can the Philips monitor be mounted on the wall?Troubleshooting & FAQs