OPERATING your Breville Handy Mix Digital™
Before first use
Remove and safely discard any packaging material and promotional stickers before using the appliance for the fist time. Wash the whisk, beaters and dough hooks in warm soapy water with a soft cloth. Rinse and dry thoroughly. The whisk, beaters and dough hooks are also dishwasher safe. Wipe the motor body with a damp cloth then dry thoroughly.
NOTE
When first using your hand mixer, you may notice an odor coming from the motor. This is normal and will dissipate with time.
Using The Hand Mixer
Step 1
Ensure the ‘ON/OFF’ switch is in the ‘OFF’ position and the power cord is unplugged from the power outlet.
Step 2
Align the desired attachment shaft (whisk, beaters, dough hooks) with the attachment sockets on the underside of the hand mixer. Push firmly, turning slightly if required, until they click into place.
The attachment shaft with collar should be inserted into the larger hole, while the attachment shaft without collar should be inserted into the smaller hole.
COLLAR | LARGER HOLE |
NOTE
The whisk shaft has a collar and should be inserted into the larger attachment socket. Do not insert the wire whisk by holding the wire end as this may cause damage to the wires. Do not use the whisk with any other attachment.
Step 3
Select a mixing bowl large enough to accommodate the attachments, as a bowl that is too small will damage the attachments. Add ingredients to the mixing bowl as directed in the recipe.
Step 4
Insert the power plug into a 110/120V power outlet.
Step 5
Place the attachment (whisk, beaters, dough hooks) into the ingredients inside the mixing bowl. To commence mixing, move the ‘ON/OFF’ switch to the ‘ON’ position. Push the ‘Increase Speed’ 
button until you have reached the required speed. If you wish to make the speed slower at any time, push the ‘Decrease Speed’ 
button.
The LCD screen will display the selected speed as well as the mixing time that has elapsed.
NOTE
Always begin mixing on a lower speed setting to prevent splattering, increasing to the desired speed for the mixing task.
9
BHM500XL_IB_A10.indd 9 | 17/09/10 11:07 AM |