IBM SC41-5420-04 manual Using the TCP/IP Administration Menu, Tcpadm

Page 20

vAutomatic IPL

The Automatic IPL option determines whether the system automatically starts when the installation process has completed successfully.

When TCP/IP successfully installs, either the Work with Licensed Programs menu or the Sign On display appears.

6.Select option 50 (Display log for messages) to verify that you have installed the licensed program successfully. If an error occurs, you will see the message Work with licensed program function not complete on the bottom of the Work with Licensed Programs display.

To use TCP/IP, you must configure it after you have completed the installation. See “Configuring TCP/IP using the EZ-Setup Wizard” on page 9.

Using the TCP/IP Administration Menu

The TCP/IP Administration menu (Figure 1) is a starting point for the configuration tasks. To display the menu, enter GO TCPADM from the iSeries Main Menu.

TCPADM

TCP/IP Administration

System: RC

Select one of the following:

1.Configure TCP/IP

2.Configure TCP/IP applications

3.Start TCP/IP

4.End TCP/IP

5.Start TCP/IP servers

6.End TCP/IP servers

7.Work with TCP/IP network status

8.Verify TCP/IP connection

9.Start TCP/IP FTP session

10.Start TCP/IP TELNET session

11.Send TCP/IP spooled file

20. Work with TCP/IP jobs in QSYSWRK subsystem

Selection or command

===>

F3=Exit F4=Prompt F9=Retrieve F12=Cancel

Figure 1. TCP/IP Administration Menu

Following are descriptions of the menu options.

vOption 1. Configure TCP/IP: Displays the Configure TCP/IP menu. Use the options on this menu to configure your local server to communicate with other systems in a TCP/IP network.

vOption 2. Configure TCP/IP applications: Displays the Configure TCP/IP Applications menu. Use the options on this menu to configure the TCP/IP licensed program (5769-TC1) applications installed on your system.

vOption 3. Start TCP/IP: Select this option to issue the Start TCP/IP (STRTCP) command. This command initializes and activates TCP/IP processing, starts the TCP/IP interfaces, and starts the TCP/IP server jobs.

vOption 4. End TCP/IP: Select this option to issue the End TCP/IP (ENDTCP) command. This command is used to end all TCP/IP processing on this system.

6OS/400 TCP/IP Configuration and Reference V5R1

Image 20

Contents TCP/IP Configuration and Reference Page TCP/IP Configuration and Reference Fifth Edition May Contents Index About TCP/IP Configuration and Reference SC41-5420 Vi OS/400 TCP/IP Configuration and Reference V5R1 Prerequisite and related information Operations NavigatorViii OS/400 TCP/IP Configuration and Reference V5R1 Page OS/400 TCP/IP Configuration and Reference V5R1 Summary of changes Xii OS/400 TCP/IP Configuration and Reference V5R1 Configuring TCP/IP What you need to know before you can configure TCP/IPPlanning for TCP/IP Installation and Configuration Gathering Information About your NetworkTCP/IP Planning Checklists Line Description Parameters ChecklistLocal TCP/IP Host Information Checklist Interfaces to Local TCP/IP NetworksInstalling the TCP/IP Application Programs 25 / Remote System InformationUsing the TCP/IP Administration Menu TcpadmUsing the Configure TCP/IP Menu Configure TCP/IP Menu CfgtcpConfiguring TCP/IP using the EZ-Setup Wizard Configuring TCP/IP using the Command Line InterfaceServices table Protocol tableConfiguring a Line Description Configuring a TCP/IP InterfaceImportant Note Internet addressSubnet mask Line descriptionAssociated local interface Automatic startConfiguring TCP/IP Routes Do you need to add routes at all?Route destination Maximum Transmission Unit MTU sizeDftroute None Preferred binding interfaceAdding TCP/IP routes NO, *YES Multiple Default RoutesNormal Configuring TCP/IP attributes Configuring TCP/IP Remote System InformationIP Datagram Forwarding Adding Remote System InformationLind 15, *LIND, *TRANSMIT PVCNone NONE, *REQUEST, *ACCEPT Configuring TCP/IP Host Table Entries Adding an Entry to the Host TableWork with TCP/IP Host Table Display DNS BernMacian Localhost SYSNAM890Loopback Configuring the Local Domain and Host Name AnyNet/400 Appc over TCP/IPDomain Name System DNS Server LocalStarting TCP/IP and TCP/IP Servers Dspmsg Qsysopr Dspmsg QtcpTCP/IP Jobs Job Name DescriptionVerifying the TCP/IP Connection End TCP/IP EndtcpVerifying Additional TCP/IP Connections Successful Ping MessagesVerify TCP/IP Connection Verify TCP/IP Connection VfytcpcnnVerifying TCP/IP Connections with Host Name-Example Verify TCP/IP Connection PingVERBOSE, *QUIET COMP, *ESCAPESaving Your TCP/IP Configuration Verifying TCP/IP Connections with Internet Address-ExampleConfiguring TCP/IP 32 OS/400 TCP/IP Configuration and Reference V5R1 Network Status Work with TCP/IP Network Status MenuWork with TCP/IP Interface Status Work with TCP/IP Network StatusWork with TCP/IP Interface Status Internet Network LineOpt Address Mask Service Starting TCP/IP InterfacesInternet Subnet Type MaxthrputEnding TCP/IP Interfaces Route Subnet Next Opt Destination Mask Hop Available Display TCP/IP Route InformationDisplay TCP/IP Route Information Route Type Opt Destination Service Work with TCP/IP Connection StatusType Source BottomRemote Local Opt Address Port User Bytes Out Work with TCP/IP Connection StatusRemote Local Opt Address Port Idle Time State Ending TCP/IP Connections ALLRemote Local Opt Address Port Type TCPWorking with Configuration Status Confirm End of TCP/IP ConnectionsDisplaying TCP/IP Network Status Information Display Multicast GroupsOpt Description Status Job Trnline Active Trnlinet Trnlitcp QtcpipHost Group Hardware Address Displaying TCP/IP InterfacesDisplay Multicast Host Groups Displaying Associated Routes Display TCP/IP Interface StatusTrlan MSBRoute Subnet Next Opt Destination Mask Hop Displaying Route Details OptionDisplay Associated Routes Direct Displaying TCP/IP Route InformationDisplay TCP/IP Route Details Display TCP/IP Route Information, Display 1 Displaying TCP/IP Connections Display TCP Connection StatusDisplaying Connection Totals Display TCP/IP Connection Status, Display 2TCP/IP Host Tables Display TCP/IP Connection TotalsManaging TCP/IP Host Tables Host File FormatsHost Table Information with *AIX Files Host Table Information with *NIC FilesHost Table Information with *AS400 Files Tips for Merging Host TablesMerging TCP/IP Host Tables Managing the Host Table from a Central Site Merge the File Negative Advice from TCP or the Data Link Layer Dead Gateway ProcessingHow IP Responds to Negative Advice Multihoming FunctionMultihoming Single Host, Single Network, Single Line Per physical LAN only Example The Multihoming function Multihoming TCP/IP NetworkLoopback None Type of Service TOSX25LINE Multiple Routes TOS ExampleTCP/IP Port Restriction Configuring TCP/IP Port Restrictions PaoloGerry UDP, *TCPOnly Configure Related Tables Menu Related Tables and the Host TableWork with Service Table Entry Display Using X.25 PVC instead of SVC IBMMulticast Restrictions Chglintrn Lindtrnline FCNADRC00000040000 70 OS/400 TCP/IP Configuration and Reference V5R1 TCP/IP Protocol Support Provided by IOP Base Pool SizeTCP/IP Jobs Outbound batching of TCP and UDP datagrams Merge Host Table Performance Running TCP/IP Only Performance Considerations74 OS/400 TCP/IP Configuration and Reference V5R1 Line type Configuration command Configuration Steps Source Service Access PointCreating the Line Description Line Description NameSetting the Maximum Transmission Unit Determining the Maximum Size of Datagrams78 OS/400 TCP/IP Configuration and Reference V5R1 Appendix B. TCP/IP Application Exit Points and Programs TCP/IP Exit Points and Exit ProgramsOS/400 Registration Facility TCP/IP Application Exit PointsCreating Exit Programs Adding Your Exit Program to the Registration FacilitySelect your exit point QAPP0100Select the Add Exit Program option Add your exit programRemoving Exit Programs YourlibExit Point Interfaces for TCP/IP Application Exit Points TCP/IP Application Request Validation Exit Point InterfaceRequired Parameter Group Application identifierOperation identifier User profileRemote IP address Length of remote IP addressAllow operation Usage NotesLength of operation-specific information QSYS.LIB file system pathnames are always in uppercase Point Command stringLength of command string Command processor identifier Character conversion optionQshell interpreter not installed 92 OS/400 TCP/IP Configuration and Reference V5R1 Copyright IBM Corp Programming Interface Information TrademarksDB2 96 OS/400 TCP/IP Configuration and Reference V5R1 Index Special Characters Interface Qtgtelnets Qtsmtpsrvr Page SC41-5420-04