IBM SC41-5420-04 manual Displaying TCP/IP Network Status Information, Display Multicast Groups

Page 56

 

Work with Configuration Status

 

SYSNAM04

 

 

 

04/26/94

15:55:58

Position to

Starting characters

 

 

Type options, press Enter.

 

 

 

1=Vary on 2=Vary off 5=Work with job

8=Work with description

 

9=Display mode status ...

 

 

 

Opt Description

Status

-------------

Job--------------

TRNLINE

ACTIVE

 

 

 

TRNLINET

ACTIVE

 

 

 

TRNLITCP

ACTIVE

QTCPIP

QTCP

007936

Figure 33. Work with Configuration Status

Displaying TCP/IP Network Status Information

In addition to working with network status functions, the Work with TCP/IP Network Status menu allows you to display current information about your TCP/IP network, including multicast groups, TCP/IP interfaces, and associated routes, to name a few.

Display Multicast Groups

To display the multicast groups associated with an interface:

1.On the Work with TCP/IP Interface Status display, type 14 in the option field for each interface for which you want to see the associated multicast groups.

2.Press the Enter key.

Figure 34 on page 43 illustrates the display of the multicast groups for an Ethernet interface.

If you have requested multicast group information for more than one interface, press the Enter key to review the remaining displays.

42OS/400 TCP/IP Configuration and Reference V5R1

Image 56
Contents TCP/IP Configuration and Reference Page TCP/IP Configuration and Reference Fifth Edition May Contents Index About TCP/IP Configuration and Reference SC41-5420 Vi OS/400 TCP/IP Configuration and Reference V5R1 Prerequisite and related information Operations NavigatorViii OS/400 TCP/IP Configuration and Reference V5R1 Page OS/400 TCP/IP Configuration and Reference V5R1 Summary of changes Xii OS/400 TCP/IP Configuration and Reference V5R1 Configuring TCP/IP What you need to know before you can configure TCP/IPPlanning for TCP/IP Installation and Configuration Gathering Information About your NetworkTCP/IP Planning Checklists Line Description Parameters ChecklistLocal TCP/IP Host Information Checklist Interfaces to Local TCP/IP NetworksInstalling the TCP/IP Application Programs 25 / Remote System InformationUsing the TCP/IP Administration Menu TcpadmUsing the Configure TCP/IP Menu Configure TCP/IP Menu CfgtcpConfiguring TCP/IP using the EZ-Setup Wizard Configuring TCP/IP using the Command Line InterfaceServices table Protocol tableConfiguring a Line Description Configuring a TCP/IP InterfaceImportant Note Internet addressSubnet mask Line descriptionAssociated local interface Automatic startConfiguring TCP/IP Routes Do you need to add routes at all?Route destination Maximum Transmission Unit MTU sizeDftroute None Preferred binding interfaceAdding TCP/IP routes NO, *YES Multiple Default RoutesNormal Configuring TCP/IP attributes Configuring TCP/IP Remote System InformationIP Datagram Forwarding Adding Remote System InformationLind 15, *LIND, *TRANSMIT PVCNone NONE, *REQUEST, *ACCEPT Configuring TCP/IP Host Table Entries Adding an Entry to the Host TableWork with TCP/IP Host Table Display DNS BernMacian Localhost SYSNAM890Loopback Configuring the Local Domain and Host Name AnyNet/400 Appc over TCP/IPDomain Name System DNS Server LocalStarting TCP/IP and TCP/IP Servers Dspmsg Qsysopr Dspmsg QtcpTCP/IP Jobs Job Name DescriptionVerifying the TCP/IP Connection End TCP/IP EndtcpVerifying Additional TCP/IP Connections Successful Ping MessagesVerify TCP/IP Connection Verify TCP/IP Connection VfytcpcnnVerifying TCP/IP Connections with Host Name-Example Verify TCP/IP Connection PingVERBOSE, *QUIET COMP, *ESCAPESaving Your TCP/IP Configuration Verifying TCP/IP Connections with Internet Address-ExampleConfiguring TCP/IP 32 OS/400 TCP/IP Configuration and Reference V5R1 Network Status Work with TCP/IP Network Status MenuWork with TCP/IP Interface Status Work with TCP/IP Network StatusWork with TCP/IP Interface Status Internet Network LineOpt Address Mask Service Starting TCP/IP InterfacesInternet Subnet Type MaxthrputEnding TCP/IP Interfaces Route Subnet Next Opt Destination Mask Hop Available Display TCP/IP Route InformationDisplay TCP/IP Route Information Route Type Opt Destination Service Work with TCP/IP Connection StatusType Source BottomRemote Local Opt Address Port User Bytes Out Work with TCP/IP Connection StatusRemote Local Opt Address Port Idle Time State Ending TCP/IP Connections ALLRemote Local Opt Address Port Type TCPWorking with Configuration Status Confirm End of TCP/IP ConnectionsDisplaying TCP/IP Network Status Information Display Multicast GroupsOpt Description Status Job Trnline Active Trnlinet Trnlitcp QtcpipHost Group Hardware Address Displaying TCP/IP InterfacesDisplay Multicast Host Groups Displaying Associated Routes Display TCP/IP Interface StatusTrlan MSBRoute Subnet Next Opt Destination Mask Hop Displaying Route Details OptionDisplay Associated Routes Direct Displaying TCP/IP Route InformationDisplay TCP/IP Route Details Display TCP/IP Route Information, Display 1 Displaying TCP/IP Connections Display TCP Connection StatusDisplaying Connection Totals Display TCP/IP Connection Status, Display 2TCP/IP Host Tables Display TCP/IP Connection TotalsManaging TCP/IP Host Tables Host File FormatsHost Table Information with *AIX Files Host Table Information with *NIC FilesHost Table Information with *AS400 Files Tips for Merging Host TablesMerging TCP/IP Host Tables Managing the Host Table from a Central Site Merge the File Negative Advice from TCP or the Data Link Layer Dead Gateway ProcessingHow IP Responds to Negative Advice Multihoming FunctionMultihoming Single Host, Single Network, Single Line Per physical LAN only Example The Multihoming function Multihoming TCP/IP NetworkLoopback None Type of Service TOSX25LINE Multiple Routes TOS ExampleTCP/IP Port Restriction Configuring TCP/IP Port Restrictions PaoloGerry UDP, *TCPOnly Configure Related Tables Menu Related Tables and the Host TableWork with Service Table Entry Display Using X.25 PVC instead of SVC IBMMulticast Restrictions Chglintrn Lindtrnline FCNADRC00000040000 70 OS/400 TCP/IP Configuration and Reference V5R1 TCP/IP Protocol Support Provided by IOP Base Pool SizeTCP/IP Jobs Outbound batching of TCP and UDP datagrams Merge Host Table Performance Running TCP/IP Only Performance Considerations74 OS/400 TCP/IP Configuration and Reference V5R1 Line type Configuration command Configuration Steps Source Service Access PointCreating the Line Description Line Description NameSetting the Maximum Transmission Unit Determining the Maximum Size of Datagrams78 OS/400 TCP/IP Configuration and Reference V5R1 Appendix B. TCP/IP Application Exit Points and Programs TCP/IP Exit Points and Exit ProgramsOS/400 Registration Facility TCP/IP Application Exit PointsCreating Exit Programs Adding Your Exit Program to the Registration FacilitySelect your exit point QAPP0100Select the Add Exit Program option Add your exit programRemoving Exit Programs YourlibExit Point Interfaces for TCP/IP Application Exit Points TCP/IP Application Request Validation Exit Point InterfaceRequired Parameter Group Application identifierOperation identifier User profileRemote IP address Length of remote IP addressAllow operation Usage NotesLength of operation-specific information QSYS.LIB file system pathnames are always in uppercase Point Command stringLength of command string Command processor identifier Character conversion optionQshell interpreter not installed 92 OS/400 TCP/IP Configuration and Reference V5R1 Copyright IBM Corp Programming Interface Information TrademarksDB2 96 OS/400 TCP/IP Configuration and Reference V5R1 Index Special Characters Interface Qtgtelnets Qtsmtpsrvr Page SC41-5420-04