IBM SC41-5420-04 manual Related Tables and the Host Table, Configure Related Tables Menu

Related Tables and the Host Table

Socket applications require a set of tables from which they can retrieve specific TCP/IP network data when needed. These are as follows:

vHost table

vService table

vProtocol table

vNetwork table

The host table contains a list of host names and corresponding Internet addresses. Socket applications requesting host data obtain it either from the server host database file or from the domain name server.

The service table contains a list of services and the specific port and protocol a services uses. The protocol table contains a list of protocols used in the TCP/IP network. The network table contains a list of networks and the corresponding Internet addresses.

UNIX** systems traditionally store this information in the following files:

v/etc/hosts - host table

v/etc/protocols - protocol table

v/etc/services - service table

v/etc/networks - network table

iSeries TCP/IP maintains the service, protocol, and network tables as database files. iSeries TCP/IP refers to these three tables as related tables. To configure or view the protocol, services, or network tables, select option 21 (Configure Related Tables) on the Configure TCP/IP menu. You are shown the display in Figure 58.

Configure Related Tables

System: SYSNAM03

Select one of the following:

1.Work with service table entry

2.Work with protocol table entry

3.Work with network table entry

Selection or command

===> ___________________________________________________________________

________________________________________________________________________

F3=Exit F4=Prompt F9=Retrieve F12=Cancel

Figure 58. Configure Related Tables Menu

You can change the services, protocols, and network files using the options from this display.

Chapter 2. TCP/IP: Operation, Management, and Advanced Topics 65