IBM SC41-5420-04 manual Saving Your TCP/IP Configuration

Page 44

Verify TCP/IP Connection (PING)

Type choices, press Enter.

Remote system . . . . . . . . . > SYSNAM36.SYSNAM123.IBM.COM_____________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

 

Additional Parameters

 

Message mode:

 

 

Response message detail . . .

*VERBOSE

*VERBOSE, *QUIET

Summary, if response errors .

*COMP

*COMP, *ESCAPE

Packet length (in bytes) . . . .

256

8-512

Number of packets

5

1-999

Wait time (in seconds)

1

1-120

Local internet address

*ANY________

 

Type of service

*NORMAL

*MINDELAY, *MAXTHRPUT...

IP time to live

*DFT

1-255, *DFT

 

 

 

More...

F3=Exit

F4=Prompt F5=Refresh

F12=Cancel

F13=How to use this display

F24=More keys

 

 

Figure 22. Verifying Connection to Remote System SYS1

Verifying TCP/IP Connections with Internet Address—Example

In this example, (Figure 22) the connection to the remote system at Internet address 9.4.191.76 is verified using the system defaults for packet length, number of packets, and wait time.

Verify TCP/IP Connection (PING)

Type choices, press Enter.

Remote system . . . . . . . . . *intnetadr___________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

Remote internet address . . . . > '9.4.191.76'

Figure 23. Verifying Connection to Remote System at Internet Address 9.4.191.76

Step 10—Saving Your TCP/IP Configuration

To save your TCP/IP configuration files, use the following command:

SAVOBJ OBJ(QATOC* QATM*) LIB(QUSRSYS)

DEV(TAP01) OBJTYPE(*FILE)

The associated line descriptions are not saved with this command. Configuration objects are saved with the system.

To maintain consistency, save all TCP/IP configuration files together.

30OS/400 TCP/IP Configuration and Reference V5R1

Image 44
Contents TCP/IP Configuration and Reference Page TCP/IP Configuration and Reference Fifth Edition May Contents Index About TCP/IP Configuration and Reference SC41-5420 Vi OS/400 TCP/IP Configuration and Reference V5R1 Prerequisite and related information Operations NavigatorViii OS/400 TCP/IP Configuration and Reference V5R1 Page OS/400 TCP/IP Configuration and Reference V5R1 Summary of changes Xii OS/400 TCP/IP Configuration and Reference V5R1 Configuring TCP/IP What you need to know before you can configure TCP/IPPlanning for TCP/IP Installation and Configuration Gathering Information About your NetworkTCP/IP Planning Checklists Line Description Parameters ChecklistLocal TCP/IP Host Information Checklist Interfaces to Local TCP/IP NetworksInstalling the TCP/IP Application Programs 25 / Remote System InformationUsing the TCP/IP Administration Menu TcpadmUsing the Configure TCP/IP Menu Configure TCP/IP Menu CfgtcpConfiguring TCP/IP using the EZ-Setup Wizard Configuring TCP/IP using the Command Line InterfaceServices table Protocol tableConfiguring a Line Description Configuring a TCP/IP InterfaceImportant Note Internet addressSubnet mask Line descriptionAssociated local interface Automatic startConfiguring TCP/IP Routes Do you need to add routes at all?Route destination Maximum Transmission Unit MTU sizeDftroute None Preferred binding interfaceAdding TCP/IP routes NO, *YES Multiple Default RoutesNormal Configuring TCP/IP attributes Configuring TCP/IP Remote System InformationIP Datagram Forwarding Adding Remote System InformationLind 15, *LIND, *TRANSMIT PVCNone NONE, *REQUEST, *ACCEPT Configuring TCP/IP Host Table Entries Adding an Entry to the Host TableWork with TCP/IP Host Table Display DNS BernMacian Localhost SYSNAM890Loopback Configuring the Local Domain and Host Name AnyNet/400 Appc over TCP/IPDomain Name System DNS Server LocalStarting TCP/IP and TCP/IP Servers Dspmsg Qsysopr Dspmsg QtcpTCP/IP Jobs Job Name DescriptionVerifying the TCP/IP Connection End TCP/IP EndtcpVerifying Additional TCP/IP Connections Successful Ping MessagesVerify TCP/IP Connection Verify TCP/IP Connection VfytcpcnnVerifying TCP/IP Connections with Host Name-Example Verify TCP/IP Connection PingVERBOSE, *QUIET COMP, *ESCAPESaving Your TCP/IP Configuration Verifying TCP/IP Connections with Internet Address-ExampleConfiguring TCP/IP 32 OS/400 TCP/IP Configuration and Reference V5R1 Network Status Work with TCP/IP Network Status MenuWork with TCP/IP Interface Status Work with TCP/IP Network StatusWork with TCP/IP Interface Status Internet Network LineOpt Address Mask Service Starting TCP/IP InterfacesInternet Subnet Type MaxthrputEnding TCP/IP Interfaces Route Subnet Next Opt Destination Mask Hop Available Display TCP/IP Route InformationDisplay TCP/IP Route Information Route Type Opt Destination Service Work with TCP/IP Connection StatusType Source BottomRemote Local Opt Address Port User Bytes Out Work with TCP/IP Connection StatusRemote Local Opt Address Port Idle Time State Ending TCP/IP Connections ALLRemote Local Opt Address Port Type TCPWorking with Configuration Status Confirm End of TCP/IP ConnectionsDisplaying TCP/IP Network Status Information Display Multicast GroupsOpt Description Status Job Trnline Active Trnlinet Trnlitcp QtcpipHost Group Hardware Address Displaying TCP/IP InterfacesDisplay Multicast Host Groups Displaying Associated Routes Display TCP/IP Interface StatusTrlan MSBRoute Subnet Next Opt Destination Mask Hop Displaying Route Details OptionDisplay Associated Routes Direct Displaying TCP/IP Route InformationDisplay TCP/IP Route Details Display TCP/IP Route Information, Display 1 Displaying TCP/IP Connections Display TCP Connection StatusDisplaying Connection Totals Display TCP/IP Connection Status, Display 2TCP/IP Host Tables Display TCP/IP Connection TotalsManaging TCP/IP Host Tables Host File FormatsHost Table Information with *AIX Files Host Table Information with *NIC FilesHost Table Information with *AS400 Files Tips for Merging Host TablesMerging TCP/IP Host Tables Managing the Host Table from a Central Site Merge the File Negative Advice from TCP or the Data Link Layer Dead Gateway ProcessingHow IP Responds to Negative Advice Multihoming FunctionMultihoming Single Host, Single Network, Single Line Per physical LAN only Example The Multihoming function Multihoming TCP/IP NetworkLoopback None Type of Service TOSX25LINE Multiple Routes TOS ExampleTCP/IP Port Restriction Configuring TCP/IP Port Restrictions PaoloGerry UDP, *TCPOnly Configure Related Tables Menu Related Tables and the Host TableWork with Service Table Entry Display Using X.25 PVC instead of SVC IBMMulticast Restrictions Chglintrn Lindtrnline FCNADRC00000040000 70 OS/400 TCP/IP Configuration and Reference V5R1 TCP/IP Protocol Support Provided by IOP Base Pool SizeTCP/IP Jobs Outbound batching of TCP and UDP datagrams Merge Host Table Performance Running TCP/IP Only Performance Considerations74 OS/400 TCP/IP Configuration and Reference V5R1 Line type Configuration command Configuration Steps Source Service Access PointCreating the Line Description Line Description NameSetting the Maximum Transmission Unit Determining the Maximum Size of Datagrams78 OS/400 TCP/IP Configuration and Reference V5R1 Appendix B. TCP/IP Application Exit Points and Programs TCP/IP Exit Points and Exit ProgramsOS/400 Registration Facility TCP/IP Application Exit PointsCreating Exit Programs Adding Your Exit Program to the Registration FacilitySelect your exit point QAPP0100Select the Add Exit Program option Add your exit programRemoving Exit Programs YourlibExit Point Interfaces for TCP/IP Application Exit Points TCP/IP Application Request Validation Exit Point InterfaceRequired Parameter Group Application identifierOperation identifier User profileRemote IP address Length of remote IP addressAllow operation Usage NotesLength of operation-specific information QSYS.LIB file system pathnames are always in uppercase Point Command stringLength of command string Command processor identifier Character conversion optionQshell interpreter not installed 92 OS/400 TCP/IP Configuration and Reference V5R1 Copyright IBM Corp Programming Interface Information TrademarksDB2 96 OS/400 TCP/IP Configuration and Reference V5R1 Index Special Characters Interface Qtgtelnets Qtsmtpsrvr Page SC41-5420-04