Fujitsu XG2600 manual Failure to follow this may cause damage to

XG2600 Hardware Guide

Caution	Indicates that improper use can cause light or moderate injury.
	In addition, this symbol indicates a chance of damage to this device and other connected equipment.
	Cautions
	Do not touch this device for more than one	Do not put objects on this device or use it as a
	minute while it is turned on.	work area.
	Failure to follow this may cause low-temperature	Failure to follow this may cause damage to the
	burns.	device , or result in injury to person or failure.
	Do not stand this device vertically or stack it.	Install this device indoors.
	Failure to follow this may cause the device to fall	Installing outdoors may result in failure.
	over causing injury, damage, or failure.
	Do not install this device on shaky stands, unlvel	Do not use this device in places where the
	surfaces, or other unstable places.	temperature is extremely high/low or fluctuates
	In addition, do not use this device in a location where	greatly.
	impact or vibration occurs.	Failure to follow this may cause system failure.
	Failure to follow this may result in the device falling	Follow the operating temperature limit for this
	over, causing injury, damage, or failure.	device.
	You must not use this device in corrosive gas	Do not use this device near a microwave oven
	environment and other places where it is exposed	and other equipments that emit strong magnetic
	to spray of chemicals or chemical substance.	field.
	Failure to follow this may cause damage or	Failure to follow this may cause system failure.
	failure.
	Ensure enough space for the vent of this device	Make sure to unplug the power cable when
	and cables.	transporting this device.
	If you use two of the same type of device in	Failure to follow this may cause system fault.
	parallel, you need to have service areas for each.
	Failure to follow this may cause cable failures.
	Do not use any extension module other than the	Make sure to connect cables correctly.
	ones supported by this device.	Improper cable connections hinder normal
	Failure to follow this may cause system failure.	communication and causes failure of this device.
	Do not install this device near heaters or at places	Do not obstruct the vent since the internal
	subject to direct sunlight, humidity, and dust.	temperature can become very high.
	Electric shock or fire may occur.	Failure to follow this may result in fire.
	Unplug the power cable by pulling the plug with	Insert the plug into the socket completely.
	your hand.	Not completely inserting the plug may result in
	Electric shock or fire may occur due to a damaged	electric shock, smoke emitting or fire.
	plug.
	If dust is accumulates on the metal part of the	When using this device, do not cover it, or wrap it
	plug and its peripheral, wipe it out with dry cloth.	with anything.
	Continuing to use the device in this condition	Otherwise overheating may result in fire .
	may result in fire.
	Do not use this device near a radio or a TV set.	When lifting the device up, do not hold handles of
	The device can generate noise that is picked up	power supply units or fan units in order to avoid
	on the radio or the TV set.	the handles taken off.
	Avoid looking at the light source (e.g. laser light)
	directly.
	Failure to follow this may injure your eyes.

10