Fujitsu XG2600 manual Attach rack mounting brackets to the switch, Precautions

Page 41

XG2600 Hardware Guide	Chapter 2 Installation

Attach rack mounting brackets to the switch

1.Attach rack mounting brackets to fit either a standard front position of the rack or a offset position of the rack.

[STANDARD]

XG2600

[OFFSET]	Plug into the hole
	of the device.

XG2600

Rack Mounting Clamps

Precautions

PSUs have to always be located in the rear side of the rack. If the position of PSUs is not appropriate, rack mounting brackets cannot be attached to the switch properly. Check the PSU configuration.

Install the switch in a 19" rack

The switch can be installed and operated in the EIA standard 19" rack.

Reference " Install the switch in a 19” rack" (pg.34)

41	Installation of the switch

Image 41

Contents Xxxx-xxxx-xxxx XG2600Preface Contents Connecting a Setup PC Organization and Usage of This Manual About the SymbolsAbout This Manual Target Readers and Required KnowledgeProduct name Description in this manual Trademark Notification in This ManualAbbreviated Product Names Manual Name Description How the Manuals for This Device Are OrganizedAbout Warning Descriptions Safety PrecautionsSymbols Definitions If you notice abnormal conditions such as Failure to follow this may cause damage to Ensuring Security Precautions for UseSafety CleaningHigh safety Static electricityAbout Our Green Products Laser safetyXG2600 Hardware Guide Chapter Getting Started Items in the Package / Names and Functions Parts ListCD-ROM LED Details Switch Fan Unit SideLED Name Light Status LED Functions/BehaviorsSR/10GBASE-LR Switch Interface SideFDX LED PrecautionsSFP+ LINK/ACT Top Surface Attach Cable Holder to the switch first How to attach Cable Holder Cable Restraints with Tyraps1 SFP+ Module OptionInstall ation Installation Requirements Requirements for Installation EnvironmentTemperature and Humidity Requirements Power RequirementsSpace Requirements Installation RequirementsCheck-list Check Item Check ResultRear-Access Configuration Factory Default Installation of the switchDecide Switch Access Configuration Intake PSU2 Slot PSU1 SlotSlot 1/Slot Side Fan Unit SideFront-Access Configuration User Configured Exhaust AirflowDecide positions of rack mounting brackets Rear-Access Configuration Factory DefaultDecide positions for rack mounting brackets Fix rack mounting rails to the rack posts Install the switch in a 19 rackM6 Machine Screws Remove rack mounting brackets Change the direction of fans to adjust airflowChange direction of fans Loosen two screws to remove fan unitRemove fans Fix fans Remove screws and take off PSU units on the Interface Side XG2600 Hardware Guide Installation Attach rack mounting brackets to the switch Discharging Twisted Pair Cable Connecting the EquipmentCleaning of SFP+ Module Cleaning SFP+ Module / Optical ConnectorCleaning of Optical Connector Blow dust away with cleanly dry air or nitrogenRemoval of Micro Dust Connecting Twisted Pair Cable Connecting Twisted Pair Cable / SFP+ ModuleConnecting SFP+ Module Replacing SFP+ Module Make the replacing SFP+ slot to the disable statusType Core/Cladding Diameter Cable Length m# online ether port Plugging in the USB Memory Check and confirm that USB port is in a disable statusPlug in the USB Memory Replacing the USB Memory UnplugConnect RS232C Cable Connecting a Setup PCNecessary Hardware / Software # clear logging error Turn on the PowerSetup Items Prepare a Setup PCPress Return key or Enter key Precautions Confirm # is shown on screen コマンド Time SettingCommand When connecting through10GBASE-R SFP+ port Set up IP addressFlash LED IndexXG2600 Hardware Guide Index XG2600 Hardware Guide