Fujitsu XG2600 manual Connecting Twisted Pair Cable / SFP+ Module

Page 45

XG2600 Hardware Guide	Chapter 2 Installation

2.3.3Connecting Twisted Pair Cable / SFP+ Module

Below is how to connect twisted pair cable and SFP+ module.

Use straight cable when connecting with routers and terminals. Use crossing cable in case of cascading connection with other switching HUBs with transmission mode at fixed setting other than auto negotiation.

straight cable

optical cable

crossing cable

Management port of the switch is set auto negotiation enable by default. (However, SFP+ slots only support 10Gbps full duplex mode fixed setting.)

Ports automatically apply to the maximum speed that plugged equipment supports by the auto negotiation function.

• 100BASE-TX port

: Up to maximum 100Mbps full duplex mode

Connecting Twisted Pair Cable

Insert twisted pair cable to 10/100BASE-TX port until it clicks.

Twisted Pair Cable

Precautions

•Usable twisted pair cables are unshielded twisted pair cable (UTP) over category 5E and shielded twisted pair cable (STP).

•Discharge twisted pair cable before connecting as twisted pair cable may be charged static electricity. Refer "2.3.1 Discharging Twisted Pair Cable" (pg.42) for discharging method.

45	Connecting the Equipment

Image 45

Contents Xxxx-xxxx-xxxx XG2600Preface Contents Connecting a Setup PC Organization and Usage of This Manual About the SymbolsAbout This Manual Target Readers and Required KnowledgeTrademark Notification in This Manual Abbreviated Product NamesProduct name Description in this manual Manual Name Description How the Manuals for This Device Are OrganizedSafety Precautions Symbols DefinitionsAbout Warning Descriptions If you notice abnormal conditions such as Failure to follow this may cause damage to Ensuring Security Precautions for UseSafety CleaningHigh safety Static electricityAbout Our Green Products Laser safetyXG2600 Hardware Guide Chapter Getting Started Items in the Package / Names and Functions Parts ListCD-ROM LED Details Switch Fan Unit SideLED Name Light Status LED Functions/BehaviorsSR/10GBASE-LR Switch Interface SideFDX LED PrecautionsSFP+ LINK/ACT Top Surface Attach Cable Holder to the switch first How to attach Cable Holder Cable Restraints with Tyraps1 SFP+ Module OptionInstall ation Installation Requirements Requirements for Installation EnvironmentTemperature and Humidity Requirements Power RequirementsSpace Requirements Installation RequirementsCheck-list Check Item Check ResultInstallation of the switch Decide Switch Access ConfigurationRear-Access Configuration Factory Default Intake PSU2 Slot PSU1 SlotSlot 1/Slot Side Fan Unit SideFront-Access Configuration User Configured Exhaust AirflowRear-Access Configuration Factory Default Decide positions for rack mounting bracketsDecide positions of rack mounting brackets Fix rack mounting rails to the rack posts Install the switch in a 19 rackM6 Machine Screws Remove rack mounting brackets Change the direction of fans to adjust airflowLoosen two screws to remove fan unit Remove fansChange direction of fans Fix fans Remove screws and take off PSU units on the Interface Side XG2600 Hardware Guide Installation Attach rack mounting brackets to the switch Discharging Twisted Pair Cable Connecting the EquipmentCleaning of SFP+ Module Cleaning SFP+ Module / Optical ConnectorCleaning of Optical Connector Blow dust away with cleanly dry air or nitrogenRemoval of Micro Dust Connecting Twisted Pair Cable Connecting Twisted Pair Cable / SFP+ ModuleConnecting SFP+ Module Replacing SFP+ Module Make the replacing SFP+ slot to the disable statusType Core/Cladding Diameter Cable Length m# online ether port Plugging in the USB Memory Check and confirm that USB port is in a disable statusPlug in the USB Memory Replacing the USB Memory UnplugConnecting a Setup PC Necessary Hardware / SoftwareConnect RS232C Cable # clear logging error Turn on the PowerPrepare a Setup PC Press Return key or Enter key PrecautionsSetup Items Confirm # is shown on screen コマンド Time SettingCommand When connecting through10GBASE-R SFP+ port Set up IP addressFlash LED IndexXG2600 Hardware Guide Index XG2600 Hardware Guide