XG2600 Hardware Guide | Chapter 2 Installation |
|
|
Connecting SFP+ Module
Firmly install SFP+ module to SFP+ slot and lock module to the switch.
SFP+ module
Precautions
•Safely keep a guard cap of SFP+ module.
•Make sure to clean the end face of SFP+ module / optical cable before connecting optical connector because the end face may possibly be contaminated.
•Do not directly touch the contact part of SFP+ module by hands. Use wristbands when touching SFP+ module.
•Connecting part to the optical cable of SFP+ module is the laser opening.
There are two types of SFP+ modules, veil latch type and standard latch type.
Below is how to connect.
•Veil Latch Type
Insert SFP+ module to the SFP+ slot with a lever locked, and lock the module and the switch. Connect optical cable (connector shape: DLC) after inserting SFP+ module to the SFP+ slot.
When removing SFP+ module, unlock the lever, module and the switch, and remove the module after unplug the optical fiber.
Lever
•Standard Latch Type
Insert SFP+ module to the SFP+ slot, and lock the module and the switch.
Connect optical cable (connector shape: DLC) after inserting SFP+ module to the SFP+ slot.
When removing SFP+ module, remove the module after pressing a tab to unlock the module and the switch.
Tab
46 | Connecting the Equipment |