Fujitsu XG2600 manual Replacing SFP+ Module, Make the replacing SFP+ slot to the disable status

Page 47

XG2600 Hardware GuideChapter 2 Installation

Precautions

Cable length will be as below based on the specification of the optical fiber cable.

Type

Core/Cladding Diameter

Minimum Transimission Band

Cable Length (m)

MMF

62.5/125m

160MHz/km

26

 

 

 

 

 

 

200MHz/km

33

 

50/125m

400MHz/km

66

 

 

 

 

 

 

500MHz/km

82

 

 

2000MHz/km

300

 

 

 

 

Use the appropriate cable according to the installation place.

Replacing SFP+ Module

Precautions

It is possible to install/replace SFP+ module with the power on.

When replacing SFP+ module, follow the process below.

1.Make the replacing SFP+ slot to the "disable status".

In case of using telnet or console

Enter replacing SFP+ slot number in <port>

#offline ether <port>

In case of using www browser

Make the SFP+ slot number to the selective status by "Setting of physical port" of settings menu. Select "Disuse" of "Use of Physical Port", and click "Regist" icon.

Reference

Refer below for how to display top page of the switch.

User’s Guide にもし8 章に”Using the Web Interface” を記載するのになったらリンクする

"1.2 本装置のトップページを表示させる" (pg.9)

2.Replace the SFP+ module after removing optical cable, and then install the SFP+ module.

47

Connecting the Equipment

Image 47
Contents Xxxx-xxxx-xxxx XG2600Preface Contents Connecting a Setup PC Target Readers and Required Knowledge About the SymbolsOrganization and Usage of This Manual About This ManualProduct name Description in this manual Trademark Notification in This ManualAbbreviated Product Names Manual Name Description How the Manuals for This Device Are OrganizedAbout Warning Descriptions Safety PrecautionsSymbols Definitions If you notice abnormal conditions such as Failure to follow this may cause damage to Ensuring Security Precautions for UseStatic electricity CleaningSafety High safetyAbout Our Green Products Laser safetyXG2600 Hardware Guide Chapter Getting Started Items in the Package / Names and Functions Parts ListCD-ROM LED Details Switch Fan Unit SideLED Name Light Status LED Functions/BehaviorsSR/10GBASE-LR Switch Interface SideFDX LED PrecautionsSFP+ LINK/ACT Top Surface Attach Cable Holder to the switch first How to attach Cable Holder Cable Restraints with Tyraps1 SFP+ Module OptionInstall ation Power Requirements Requirements for Installation EnvironmentInstallation Requirements Temperature and Humidity RequirementsCheck Item Check Result Installation RequirementsSpace Requirements Check-listRear-Access Configuration Factory Default Installation of the switchDecide Switch Access Configuration Side Fan Unit Side PSU2 Slot PSU1 SlotIntake Slot 1/SlotFront-Access Configuration User Configured Exhaust AirflowDecide positions of rack mounting brackets Rear-Access Configuration Factory DefaultDecide positions for rack mounting brackets Fix rack mounting rails to the rack posts Install the switch in a 19 rackM6 Machine Screws Remove rack mounting brackets Change the direction of fans to adjust airflowChange direction of fans Loosen two screws to remove fan unitRemove fans Fix fans Remove screws and take off PSU units on the Interface Side XG2600 Hardware Guide Installation Attach rack mounting brackets to the switch Discharging Twisted Pair Cable Connecting the EquipmentBlow dust away with cleanly dry air or nitrogen Cleaning SFP+ Module / Optical ConnectorCleaning of SFP+ Module Cleaning of Optical ConnectorRemoval of Micro Dust Connecting Twisted Pair Cable Connecting Twisted Pair Cable / SFP+ ModuleConnecting SFP+ Module Cable Length m Make the replacing SFP+ slot to the disable statusReplacing SFP+ Module Type Core/Cladding Diameter# online ether port Replacing the USB Memory Unplug Check and confirm that USB port is in a disable statusPlugging in the USB Memory Plug in the USB MemoryConnect RS232C Cable Connecting a Setup PCNecessary Hardware / Software # clear logging error Turn on the PowerSetup Items Prepare a Setup PCPress Return key or Enter key Precautions Confirm # is shown on screen コマンド Time SettingCommand When connecting through10GBASE-R SFP+ port Set up IP addressFlash LED IndexXG2600 Hardware Guide Index XG2600 Hardware Guide