Xerox P1202 manual PCL 6 Driver Features

PCL 6 Driver Features

Configuring the PCL Drivers

Paper/Output

Use this tab to change the number of copies, page orientation, paper size, paper source and output format.

Source setting identifies the default paper source. Tray 2 source is available if the optional Tray 2 is installed.

Manual Feed source is used when printing on special media. The default Auto Continue value of the printer is 15 seconds, meaning that the printer will wait up to 15 seconds for you to press the control panel button before printing. Afterwards the printer will attempt to print from whatever paper source is available. If the paper source is set to Auto Select, the printer automatically selects the print material according to the following priority: MP Tray, Tray 1, Tray 2.

If Reverse Print Order is selected, the job will be printed in reverse order, i.e. the last page printed is the first page of the document.

The Images per Sheet feature will print multiple pages of an electronic document onto one physical sheet. The driver has the following selections for this feature:

1-Up, 2-Up, 4-Up, 6-Up, 9-Up, 16-Up

For example, if you have a four-page electronic document and you select Images per Sheet to be 2-Up, each physical sheet printed will contain 2 electronic pages per sheet.

For more information on Manual Duplex Printing, see the section. For more information on Booklet Printing, see the section.