![](/images/new-backgrounds/1190371/190371145x1.webp)
Serial/LocalTalk Card
3 |
OPEN |
CL |
OSE |
4 |
5 |
6 |
Remove the metal plate in the direction of the arrow.
Unplug the two connectors from the control board.
Remove the three screws securing the board and pull the board out of the printer.
Unpack the Serial/LocalTalk card. Avoid touching its contact pins.
Align the connector on the Serial/LocalTalk card with the connector on the control board.
Push the card firmly into the connector until it is completely inserted in place. The two connectors should fit snugly together.
Appendix B: Printer Options |