![](/images/new-backgrounds/1190371/190371107x1.webp)
Solving PostScript Problems
Solving PostScript Problems
Table 6.3 contains problems that may occur with PostScript printing (available only if the PostScript option is installed).
Table 6.3 PostScript Problems
Problem | Possible Cause | Remedy |
|
|
|
PostScript file can not | The PostScript option may | Print a configuration sheet and verify that the |
be printed. | not be installed, or the | PS version is available for printing, and that |
| installed memory may be | total system memory is at least 12 MB. |
| insufficient. | If PostScript is not available, install the |
|
| |
|
| PostScript option. See “Memory and PostScript |
|
| SIMMs” (page |
|
| If system memory is not at least 12 MB, install |
|
| an 8 MB SIMM. |
|
|
|
Error messages are | The pure binary data option | Open the Properties tab of the PostScript |
printed (i.e., “This job | is not supported by the | printer driver, click on PostScript, and click on |
contains binary data...”) | PostScript driver. | the Advanced button. The pure binary data |
|
| option is not supported. Choose another. |
|
|
|
The printer name does | The LocalTalk connection is | Make sure that the printer is powered on. |
not appear in the | not secure. | Check that the LocalTalk cable is completely |
Chooser (Macintosh |
| |
| plugged into the printer and your Macintosh. | |
only) |
| |
|
| |
|
|
|
The optional Tray 2 is | The printer driver has not | Open the PS driver Properties and set ‘Paper |
not selected in the | been configured to recognize | Tray 2’ item of Device option to Installed. |
driver. | the optional tray. |
|
|
|
|