Using Printer Utilities
JOB
Use this tab to control the following printer features:
•Timeout determines the amount of time (in seconds) the printer will wait before printing the last page of a print job that does not end with a command to print the page or a formfeed character. Valid range is 0 to 300 seconds.
•Paper Type provides the printer with information about the
type of paper to be used for a print job. If you use paper with a weight of more than 42 lb. (90 g/m2), or an envelope, set this to Thick and use the MP Tray’s manual feed slot. Otherwise use the Normal setting.
•Toner Density determines the overall density of the printed image. Valid selections are Light, Medium and Dark.
•Image Quality mode makes the printer optimize the print quality to 1200 dpi image quality.
Chapter 4: Printing |