Xerox 490 manual Relative Default of Cmyk, Saturation, Absolute, Output Screen Characteristics

Page 10

Color Management Overview

Xerox 490/980 Color Continuous Feed Printing System

Relative (Default of CMYK)

After dynamic range compression is done, colors that can not be reproduced will be converted, lightness will be sustained as much as possible, and saturation will be decreased. This is not intended for conversion of wide dynamic-ranged images, or high key and low key images.

Saturation

The saturation option is specific for pixels in images. When saturation is changed, it changes the hue and lightness of an image.

It is not recommended to change this option for photos, but is useful for conversion of graphics and charts for presentations.

Absolute

The Absolute option allows colors of reproducible areas to be converted correctly. When colors are converted, lightness is similar to original and saturation will be decreased. For colors in areas that are not reproduced, halftones will decrease significantly. It is not recommended to choose this option for conversion of wide dynamic-ranged images, or high key and low key images.

Output Screen Characteristics

The following options can be selected on the Output screen:

Screen Job: Selects Halftone Dot [Not Selectable]

Halftone Dot Shape: Circle [Not Selectable]

Select Frequency: Choose from 80/100/120/150/200/300

Note

PS/PDF must be the same setting in upstream/downstream. It is only selectable on the upstream system.

Screen Angle: Select C:15 o M:75o Y:0o K:45o [Not Selectable]

User TRC

When the Browse button of User TRC is selected, the Edit TRC window is displayed. Make any desired changes on the Edit TRC window.

1-6

Color Management Guide

Image 10
Contents Xerox 490/980TM Color Continuous Feed Printing System Page Table of Contents Color Calibration Using ColorPort Utility Software Color Management Overview Major Functions of the CMS Option Tool Generating the calibration adjustment tablesCMS Option Tool Overview Generating the color conversion tableColor Options CMS Option Tool SetupPrerequisites to setting up CMS Option Tool Color Resource SetPrinter Name Black Overprint Color CharacteristicsPrint Data Resource Group Name Print ModePerceptual Default of RGB User TRCSaturation Relative Default of CmykOutput Screen Characteristics AbsolutePre-Printed Paper Custom ink settingsCalibration data Color Management Overview Introduction to the CMS Option Tool Measuring devicesInstall the CMS Option Tool After the installation CMS Option tool tab menusCancelling the installation Uninstall the CMS Option ToolPrint Colorimetric Pattern Using the CMS Option ToolHow to print a colorimetric pattern Select the Print Colorimetric Pattern tabPrinter Configuration Layout files for the colorimetric patternsSelecting a layout file Color Conversion Layout FilesSelect the paper type How to Create Calibration DataCreate Calibration Data Select the Create Calibration Data tabExecute Specify data fileResource set at destination Upstream printerCustom Paper Paper NameDownload paper information Colorimetric value data for sidesSelect Cmyk Resource Set at Destination of DownloadingSelect Clear Data Registering Custom PaperSelect Save Data Save file as eyeoneisisuped.txtCustom Ink Characteristic Paper InformationDownload Paper Information Calibration modeComment Change Paper PropertiesSave As Backup paper informationSave CloseSelect Color Resource Restore of paper informationColor Resource Management Highlight HPAPRINTER1.cntlPrepare for Color Calibration Recommended Calibration Conditions Verify Color Calibration Resources Select this link\ColorPort Targets \Imposition Files\TOF Mark \TRC Viewer\Resource Group Names \Resource Group Names Copy Color Calibration Resources Select Show the Desktop Download ColorPort Utility Software Check for Existing Imposition Files Check for Queue and Imposition FilesCheck for Existing Queues Prepare for Color Calibration Pre-Calibration4 Engine Density Adjustment For Simplex Systems Create an Empty Color ResourceEnsure that Downloading with Calibration is not selected Pre-Calibration Engine Density Adjustment For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Set Up Imposition Files Import Simplex/Duplex Imposition FilesManipulate the Imported Simplex Imposition File Select Properties located on the bottom of the windowManipulate the Imported Duplex Imposition File Double-click DuplexPreCal.forms to open the imposition fileCreate a New Queue Create a new Simplex QueuePre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Create a new Duplex Queue Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Color Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Color Calibration Create a TRC File Color Calibration Process for v1.1.6 Software Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Regional Settings Use ColorPort to Measure Targets Select the Measure Target tabXerox 490/980 Color Continuous Feed Printing System Create TRC File with TRC Viewer Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Import TRC File into PC-UI Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Create a New Queue for Calibration Confirmation For Simplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software For Duplex Systems Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Post-Calibration Density Check Xerox 490/980 Color Continuous Feed Printing System For Simplex Systems Color Calibration Using ColorPort Utility Software Color Calibration Test Pattern NamesUsing ColorPort for Color Calibration Color Calibration Using ColorPort Utility Software Offset Specification Logical Page SettingLogical Page Size Offset Specification and Logical Page Size Explained Calculate Offset Specification and Logical Page Size Values Table of Offset Specification and Logical Page Size Values Offset Specification DPI Logical Page Size DPIPrint Using LPR Appendix