Xerox 490 manual Registering Custom Paper, Select Save Data, Select Clear Data

Page 24

CMS Option Tool

Xerox 490/980 Color Continuous Feed Printing System

Registering Custom Paper

To register custom paper:

1.Enter the Paper Setting. Set Paper Length to 18 inches.

2.Select a colorimetric pattern for color conversion. For color conversion, use Eye-One iSis.

3.The colorimetric pattern will be printed for color conversion. Select [Print] and then select [OK].

4.Select [OK] in the CMS Option Tool window.

5.Cut out the pattern along the dotted line. Halftone Dot, Error Diffusion, and Upstream/ Downstream. Lead edge black bar and left edge are critical.

6.Measure the patterns using the Eye-One iSis.

a.Connect to the Eye-One iSis and switch on the power.

b.Select [Start/Programs/X-Rite/ColorPort/ColorPort1.5.3/ColorPort 1.5.3].

c.Select [Measure Target] tab.

d.Select [EyeOneiSis.rnd] under Target.

e.Select [X-RiteEye-One iSis] under Measurement Device.

f.Select [Connect].

g.Select [No Filter].

h.Insert the Halftone Dot pattern, and select [Close].

i.Select [OK] when measurement is successful.

j.Select [Save Data...].

k.Select [CGATS] then select [Save].

l.Save the file as eyeoneisis_up_ht.txt in the My Documents directory.

m.Select [Clear Data...].

n.Repeat the previous steps for Error Diffusion pattern.

o.Save file as eyeoneisis_up_ed.txt.

7.In the CMS Option Tool window, select the [Custom Paper] tab.

8.Enter the Media name in the “Enter or select the paper name” field.

9.Browse to the data files that you have created, under “Specify a measured value data file.” There is a data file for Upstream and a data file for Downstream.

10.Select [T01] in the “Select the CMYK ink characteristic” drop down menu. T01 is General printing and T02 is for Newspapers.

11.Select [Download the paper information to the printer].

12.Select [OK] in the CMS Option Tool window.

2-12

Color Management Guide

Image 24
Contents Xerox 490/980TM Color Continuous Feed Printing System Page Table of Contents Color Calibration Using ColorPort Utility Software Color Management Overview Generating the calibration adjustment tables CMS Option Tool OverviewMajor Functions of the CMS Option Tool Generating the color conversion tableCMS Option Tool Setup Prerequisites to setting up CMS Option ToolColor Options Color Resource SetBlack Overprint Color Characteristics Printer NamePrint Data Print Mode Perceptual Default of RGBResource Group Name User TRCRelative Default of Cmyk Output Screen CharacteristicsSaturation AbsoluteCustom ink settings Pre-Printed PaperCalibration data Color Management Overview Introduction to the CMS Option Tool Measuring devicesInstall the CMS Option Tool After the installation CMS Option tool tab menusCancelling the installation Uninstall the CMS Option ToolUsing the CMS Option Tool How to print a colorimetric patternPrint Colorimetric Pattern Select the Print Colorimetric Pattern tabPrinter Configuration Layout files for the colorimetric patternsSelecting a layout file Color Conversion Layout FilesHow to Create Calibration Data Create Calibration DataSelect the paper type Select the Create Calibration Data tabSpecify data file Resource set at destinationExecute Upstream printerCustom Paper Paper NameColorimetric value data for sides Select CmykDownload paper information Resource Set at Destination of DownloadingRegistering Custom Paper Select Save DataSelect Clear Data Save file as eyeoneisisuped.txtCustom Ink Characteristic Paper InformationCalibration mode CommentDownload Paper Information Change Paper PropertiesBackup paper information SaveSave As CloseRestore of paper information Color Resource ManagementSelect Color Resource Highlight HPAPRINTER1.cntlPrepare for Color Calibration Recommended Calibration Conditions Verify Color Calibration Resources Select this link\ColorPort Targets \Imposition Files\TOF Mark \TRC Viewer\Resource Group Names \Resource Group Names Copy Color Calibration Resources Select Show the Desktop Download ColorPort Utility Software Check for Queue and Imposition Files Check for Existing Imposition FilesCheck for Existing Queues Prepare for Color Calibration Pre-Calibration4 Engine Density Adjustment Create an Empty Color Resource For Simplex SystemsEnsure that Downloading with Calibration is not selected Pre-Calibration Engine Density Adjustment For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Set Up Imposition Files Import Simplex/Duplex Imposition FilesManipulate the Imported Simplex Imposition File Select Properties located on the bottom of the windowManipulate the Imported Duplex Imposition File Double-click DuplexPreCal.forms to open the imposition fileCreate a New Queue Create a new Simplex QueuePre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Create a new Duplex Queue Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Color Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Color Calibration Create a TRC File Color Calibration Process for v1.1.6 Software Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Regional Settings Use ColorPort to Measure Targets Select the Measure Target tabXerox 490/980 Color Continuous Feed Printing System Create TRC File with TRC Viewer Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Import TRC File into PC-UI Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Create a New Queue for Calibration Confirmation For Simplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software For Duplex Systems Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Post-Calibration Density Check Xerox 490/980 Color Continuous Feed Printing System For Simplex Systems Color Calibration Using ColorPort Utility Software Color Calibration Test Pattern NamesUsing ColorPort for Color Calibration Color Calibration Using ColorPort Utility Software Logical Page Setting Offset SpecificationLogical Page Size Offset Specification and Logical Page Size Explained Calculate Offset Specification and Logical Page Size Values Table of Offset Specification and Logical Page Size Values Offset Specification DPI Logical Page Size DPIPrint Using LPR Appendix