
Color Calibration Process for v1.1.6 Software | Xerox 490/980 Color Continuous Feed Printing System |
23.Select the [Color] tab.
24.In the Color Characteristics (Upstream) box, in the Printer Name
25.In the Resource Group Name
26.For both RGB and CMYK under the Simulation
27.Select [OK].
28.Select the [PDF] tab.
29.In the Page Size
Note
In the following step, while using Inches is recommended, it is not required. Millimeters are also supported by this documentation.
30.For Unit, select [Inch].
31.In the Width field type [5.6] (142 mm). In the Length field type [12.00] (305 mm).
32.In the Copies field, type [5] and select [OK].
Color Management Guide |