Xerox 490 Comment, Download Paper Information, Change Paper Properties, Standard/Custom paper

Page 26

CMS Option Tool

Xerox 490/980 Color Continuous Feed Printing System

Comment

Any registered comments are listed in the properties of paper information.

Download Paper Information

Paper information can be downloaded to the printer. Select the paper information from the list and select [Download]. A confirmation window will appear, select [Yes] to proceed. The color resource of the selected paper information will download and be sent to the printer.

You can download paper information with calibration data to the printer. This data is generated using previously generated calibration files and color measurement data. This data is specific to the paper that is selected in the paper information list.

Select the check box and select a resource to be used when downloaded. Select any paper information and then select [Download].

Change Paper Properties

To display the properties of a paper registered in the CMS Option tool, select [Properties]. The window that displays is available to edit. The following options are available to change.

Paper name

The paper name displays.

Printer name

The printer name that has been registered on the GUI is displayed. The printer name can be changed.

Standard/Custom paper

The paper name of either the standard or custom paper is displayed here.

Measurement time

All data from each color measurement is generated and these dates are listed here.

Resource creation time

The date and time when a color resource file has been created will be displayed.

Calibration On/Off

If calibration data is enabled or disabled, it will be displayed here.

Calibration mode

The calibration mode will be displayed here depending on if the configuration is for simplex or duplex.

2-14	Color Management Guide

Image 26

Contents Xerox 490/980TM Color Continuous Feed Printing System Page Table of Contents Color Calibration Using ColorPort Utility Software Color Management Overview Major Functions of the CMS Option Tool Generating the calibration adjustment tablesCMS Option Tool Overview Generating the color conversion tableColor Options CMS Option Tool SetupPrerequisites to setting up CMS Option Tool Color Resource SetPrint Data Black Overprint Color CharacteristicsPrinter Name Resource Group Name Print ModePerceptual Default of RGB User TRCSaturation Relative Default of CmykOutput Screen Characteristics AbsoluteCalibration data Custom ink settingsPre-Printed Paper Color Management Overview Introduction to the CMS Option Tool Measuring devicesInstall the CMS Option Tool After the installation CMS Option tool tab menusCancelling the installation Uninstall the CMS Option ToolPrint Colorimetric Pattern Using the CMS Option ToolHow to print a colorimetric pattern Select the Print Colorimetric Pattern tabPrinter Configuration Layout files for the colorimetric patternsSelecting a layout file Color Conversion Layout FilesSelect the paper type How to Create Calibration DataCreate Calibration Data Select the Create Calibration Data tabExecute Specify data fileResource set at destination Upstream printerCustom Paper Paper NameDownload paper information Colorimetric value data for sidesSelect Cmyk Resource Set at Destination of DownloadingSelect Clear Data Registering Custom PaperSelect Save Data Save file as eyeoneisisuped.txtCustom Ink Characteristic Paper InformationDownload Paper Information Calibration modeComment Change Paper PropertiesSave As Backup paper informationSave CloseSelect Color Resource Restore of paper informationColor Resource Management Highlight HPAPRINTER1.cntlPrepare for Color Calibration Recommended Calibration Conditions Verify Color Calibration Resources Select this link\ColorPort Targets \Imposition Files\TOF Mark \TRC Viewer\Resource Group Names \Resource Group Names Copy Color Calibration Resources Select Show the Desktop Download ColorPort Utility Software Check for Existing Queues Check for Queue and Imposition FilesCheck for Existing Imposition Files Prepare for Color Calibration Pre-Calibration4 Engine Density Adjustment Ensure that Downloading with Calibration is not selected Create an Empty Color ResourceFor Simplex Systems Pre-Calibration Engine Density Adjustment For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Set Up Imposition Files Import Simplex/Duplex Imposition FilesManipulate the Imported Simplex Imposition File Select Properties located on the bottom of the windowManipulate the Imported Duplex Imposition File Double-click DuplexPreCal.forms to open the imposition fileCreate a New Queue Create a new Simplex QueuePre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Create a new Duplex Queue Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Color Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Color Calibration Create a TRC File Color Calibration Process for v1.1.6 Software Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Regional Settings Use ColorPort to Measure Targets Select the Measure Target tabXerox 490/980 Color Continuous Feed Printing System Create TRC File with TRC Viewer Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Import TRC File into PC-UI Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Create a New Queue for Calibration Confirmation For Simplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software For Duplex Systems Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Post-Calibration Density Check Xerox 490/980 Color Continuous Feed Printing System For Simplex Systems Color Calibration Using ColorPort Utility Software Color Calibration Test Pattern NamesUsing ColorPort for Color Calibration Color Calibration Using ColorPort Utility Software Logical Page Size Logical Page SettingOffset Specification Offset Specification and Logical Page Size Explained Calculate Offset Specification and Logical Page Size Values Table of Offset Specification and Logical Page Size Values Offset Specification DPI Logical Page Size DPIPrint Using LPR Appendix