Xerox 490 manual Layout files for the colorimetric patterns, Printer Configuration

Page 18

CMS Option Tool

Xerox 490/980 Color Continuous Feed Printing System

The following explains options available under the [Print Colorimetric Pattern] tab:

Printer Configuration

Simplex/Duplex	Make a selection depending on what printer configuration you have.
	Select [Simplex] for simplex machines, [Duplex] for duplex configured
	machines.

Upstream Printer Name	The name of the first printing system is displayed here.

Downstream Printer	The name of the second printer, if you have a duplex configuration.
Name

Colorimetric Pattern

Note

The following three options are for conversion use with a new paper setting:

[DTP70]	Use this option for color conversion on the DTP70. Select this option when
	you are using the DTP70 color measuring device and wish to create a
	colorimetric pattern for the color conversion table.

[iCColor]	Use this option for color conversion when using ICCOLOR. Select this
	option when you are using the iCColor color measuring device and wish to
	create a colorimetric pattern for the color conversion table.

[Eye-One iSis]	Use this option for color conversion on the Eye-One iSis. Select this option
	when you are using the Eye-One iSis color measuring device and wish to
	create a colorimetric pattern for the color conversion table. This is the
	recommended measuring device.

Note

The following four options are for calibration use for daily ads:

[DTP70]	Select this when using the DTP70 color measuring device and need a
	colorimetric pattern for calibration.

[ICCOLOR]	Select this when using the iCColor color measuring device and need a
	colorimetric pattern for calibration.

[Eye-One iSis]	Select this when using the Eye-One iSis color measuring device and need a
	colorimetric pattern for calibration. This is the recommended measuring
	device.

[Print]	Select this to print the chosen colorimetric pattern.

Layout files for the colorimetric patterns

The layout files for the colorimetric patterns are stored in the same folder where the CMS Option Tool is located. The default location is:

C:\Program Files\Xerox\CMS Option Tool\ReferenceFiles

2-6	Color Management Guide

Image 18

Contents Xerox 490/980TM Color Continuous Feed Printing System Page Table of Contents Color Calibration Using ColorPort Utility Software Color Management Overview Major Functions of the CMS Option Tool Generating the calibration adjustment tablesCMS Option Tool Overview Generating the color conversion tableColor Options CMS Option Tool SetupPrerequisites to setting up CMS Option Tool Color Resource SetBlack Overprint Color Characteristics Printer NamePrint Data Resource Group Name Print ModePerceptual Default of RGB User TRCSaturation Relative Default of CmykOutput Screen Characteristics AbsoluteCustom ink settings Pre-Printed PaperCalibration data Color Management Overview Introduction to the CMS Option Tool Measuring devicesInstall the CMS Option Tool After the installation CMS Option tool tab menusCancelling the installation Uninstall the CMS Option ToolPrint Colorimetric Pattern Using the CMS Option ToolHow to print a colorimetric pattern Select the Print Colorimetric Pattern tabPrinter Configuration Layout files for the colorimetric patternsSelecting a layout file Color Conversion Layout FilesSelect the paper type How to Create Calibration DataCreate Calibration Data Select the Create Calibration Data tabExecute Specify data fileResource set at destination Upstream printerCustom Paper Paper NameDownload paper information Colorimetric value data for sidesSelect Cmyk Resource Set at Destination of DownloadingSelect Clear Data Registering Custom PaperSelect Save Data Save file as eyeoneisisuped.txtCustom Ink Characteristic Paper InformationDownload Paper Information Calibration modeComment Change Paper PropertiesSave As Backup paper informationSave CloseSelect Color Resource Restore of paper informationColor Resource Management Highlight HPAPRINTER1.cntlPrepare for Color Calibration Recommended Calibration Conditions Verify Color Calibration Resources Select this link\ColorPort Targets \Imposition Files\TOF Mark \TRC Viewer\Resource Group Names \Resource Group Names Copy Color Calibration Resources Select Show the Desktop Download ColorPort Utility Software Check for Queue and Imposition Files Check for Existing Imposition FilesCheck for Existing Queues Prepare for Color Calibration Pre-Calibration4 Engine Density Adjustment Create an Empty Color Resource For Simplex SystemsEnsure that Downloading with Calibration is not selected Pre-Calibration Engine Density Adjustment For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Set Up Imposition Files Import Simplex/Duplex Imposition FilesManipulate the Imported Simplex Imposition File Select Properties located on the bottom of the windowManipulate the Imported Duplex Imposition File Double-click DuplexPreCal.forms to open the imposition fileCreate a New Queue Create a new Simplex QueuePre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Create a new Duplex Queue Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Color Density Adjustment Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment Color Calibration Create a TRC File Color Calibration Process for v1.1.6 Software Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software Regional Settings Use ColorPort to Measure Targets Select the Measure Target tabXerox 490/980 Color Continuous Feed Printing System Create TRC File with TRC Viewer Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Xerox 490/980 Color Continuous Feed Printing System Import TRC File into PC-UI Xerox 490/980 Color Continuous Feed Printing System For Duplex Systems Create a New Queue for Calibration Confirmation For Simplex Systems Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software For Duplex Systems Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System Post-Calibration Density Check Xerox 490/980 Color Continuous Feed Printing System For Simplex Systems Color Calibration Using ColorPort Utility Software Color Calibration Test Pattern NamesUsing ColorPort for Color Calibration Color Calibration Using ColorPort Utility Software Logical Page Setting Offset SpecificationLogical Page Size Offset Specification and Logical Page Size Explained Calculate Offset Specification and Logical Page Size Values Table of Offset Specification and Logical Page Size Values Offset Specification DPI Logical Page Size DPIPrint Using LPR Appendix