2.Gateway Configuration
Setting up the HTTP and SNMP gateways cannot be accomplished through the graphical user interface and must be set using the gwConfig utility through a UNIX Terminal window. The IPP gateway is configured using the DocuSP interface.
Internet Services (HTTP) Gateway Configuration
Perform the following to configure the HTTP gateway:
1.Start the configuration utility. Type ./ gwConfig.
NOTE: Refer to the instructions in the section, IPP Gateway Configuration for information about starting the configuration.
2.Perform the following to set up the Internet Services (HTTP) Gateway:
Enter the name of the gateway to be configured: Internet Services
Configure the Internet Services Gateway? [Y/N] y Enter name: Value data
Printer URL: http://<controller name>.<domain name>.com
NOTE: Use the IP address of the controller if there is no domain name. For example, http://52.126.255.255.com
3.A confirmation message of the entered value displays. Confirm that the entry is correct and enter y for yes.
4.Continue with this process for every value to be configured.
5.When all of the desired values have been configured, press <Enter> at the Enter Name: [Value Data line].
6.When asked to accept the values and update the configuration, enter y for yes.
7.The configuration utility exits.
Common Controller |