5.Printing
The following information will help you understand how to enable and print using FIFO printing. The various printing utilities that are available are also outlined in this section as well as using TIFF orientation, MICR, and VIPP.
First In/First Out (FIFO) Printing
When jobs are printed in the same order in which they are received, this is FIFO printing. The Queue must also have the Release status set to Yes.
Controller settings for limited FIFO scheduling/printing
To set up the system to perform in a FIFO manner, perform the following:
1.Logon as System Administrator.
2.In DocuSP Print Services window, select [Options: Preferences: Job Policy: Resources Required] and then select [System Fault].
3.In DocuSP Print Services window, select [Options: Preferences: Font Site Policy: Use Substitute Font] then select [Yes].
4.Set up one queue as the FIFO queue.
5.When FIFO is critical, set the release status of all other queues to [No] and only submit jobs to the FIFO queue.
Important information about FIFO:
•To preserve the FIFO Job Scheduling order, set the release status of the FIFO queue to No in Queue Manager, and do not hold an individual job in Job Manager.
Common Controller |