Canon MF8080Cw manual Configuring Manually Required Information, Access Point Name/Network Name

Ad

Page 22

Configuring Manually (Required Information)

	<< Previous			Next >>

Access Point Name/Network Name

* It may be labeled as “SSID.”

It is the distinguished name for specifying a particular access point.

It is used for selecting an access point.

Network Key

*It is also called encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key.

It is a password that must be set in order to prevent communications from being intercepted. It is used for entering the network key.

Number of characters in the network key (number of digits)

It is used for selecting a entry format which corresponds to the number of network key characters (digits)

Type of Encryption (Only when Manually Entering SSID)

Please write down the network key that is currently specified for the wireless LAN router or access point. The machines supports WEP or WPA/WPA2-PSK.

WEP Authentication Method (802.11 Authentication) Open System or Shared Key

WPA/WPA2-PSK Encryption Method

Automatic (AES-CCMP or TKIP) or AES-CCMP

22

Image 22

Canon MF8080Cw, MF8380Cdw manual Configuring Manually Required Information, Access Point Name/Network Name, Network Key

Contents ImageCLASS MF8080Cw/MF8380Cdw Previous Next Previous Next Before adding the machine to a wireless LAN Precautions when connecting to a wireless LANSelect Network Settings with and , and then press OK Switching the connection Method to Wireless LANPress Menu Switching the connection Method to Wireless LAN Turn the machine OFF/ON when the following screen disappears Configuring with WPS Features Recommended Method Selecting a method for connecting to the wireless LANConfiguring Manually Configuring with WPS Features YESConfiguring with WPS Features Push Button Mode Select Wireless LAN Settings using or , and then press OKPress OK Configuring with WPS Features Push Button ModeMake sure the WiFi indicator blinks Automatic obtaining of the IP address Auto IP Configuring with WPS Features Pin Code Mode Previous Configuring with WPS Features Pin Code Mode Configuring with WPS Features Pin Code Mode Make sure the WiFi indicator blinks Automatic obtaining of the IP address Auto IP Configuring Manually Select Access PointPreparing Type of Encryption Only when Manually Entering Ssid Configuring Manually Required InformationAccess Point Name/Network Name Network KeyAssistant Configuring Manually Using the Wireless SetupCheck your network environment Click Additional Software Programs Click Start for Canon MF/LBP Wireless Setup Assistant Write down the information outlined in orange If multiple access points are displayed Configuring Manually Selecting Access Points Press Menu Select Network Settings using or and press OKConfiguring Manually Selecting Access Points Select Select Access Point using or and press OK Configuring Manually Selecting Access Points Either of the following screens is displayed Enter the network key that you have written down Ascii textSelect Yes using and press OK Make sure the Wi-Fi indicator blinks Automatic obtaining of the IP address Auto IP Configuring Manually Manually Entering Ssid Configuring Manually Manually Entering Ssid When the type of encryption is WEP When the type of encryption is WPA/WPA2-PSK Either of the following screens is displayed Enter the network key that you have written down earlier Select Yes using , and then press OK Make sure the Wi-Fi indicator blinks Automatic obtaining of the IP address Auto IP Congratulations

Related manuals

Manual 5 pages 43.82 Kb