Belkin PM11-UL/RAMA manual Jumper Settings for Wake-On-PS/2 Keyboard/Mouse, On Disable VCC power

2

Hardware Installation

2.4Jumper Settings for Wake-On-PS/2 Keyboard/Mouse

32 Wake-On-PS/2

1 KB/Mouse (JP1)

3

2

1

3

2

1

1-2 On: Disable - VCC power	2-3 On: Enable - 5VSB power
	(default)

Wake-On-PS/2 Keyboard/Mouse - Jumper JP1

The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2 mouse to wake up the system from the S5 state. By default, JP1 is enabled. “PS2KB Wakeup Select” (“IRQ/Event Activity Detect” field) in the Power Management Setup submenu of the BIOS must be set accordingly. Refer to chapter 3 for details.

Warning:

1. If you forgot the password, you must power-off the system, unplug the power cord and clear the CMOS data. Follow the steps in the “Jumper Settings for Clearing CMOS Data” section.

2.The 5VSB power source of your power supply must support ≥ 720mA.

22