Belkin PM11-UL/RAMA, PM11-EL/RAMA, PM11-EC/RAMA manual VIA OnChip PCI Device, VIA-3058 AC97 Audio

3

Award BIOS Setup Utility

complete task by themselves. Your system supports five modes, 0 (default) to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode after checking your drive.

Auto The BIOS will automatically set the system ac- cording to your hard disk drive’s timing.

Mode 0-4You can select a mode that matches your hard disk drive’s timing. Caution: Do not use the wrong setting or you will have drive errors.

IDE Primary Master/Slave UDMA and IDE Secondary Master/Slave

UDMA

These fields allow you to set the Ultra DMA in use. When Auto is selected, the BIOS will select the best available option after checking your hard drive or CD-ROM.

Auto The BIOS will automatically detect the settings for you.

Disabled The BIOS will not detect these categories.

VIA OnChip PCI Device

Move the cursor to this field and press <Enter>. The following fields will appear

VIA-3058 AC97 Audio

Auto Select this option when using the onboard audio codec.

Disabled Select this option when using a PCI sound card.

Onboard LAN (PM11-EL/RAMA and PM11-UL/RAMA only)

By default, the onboard LAN chip is enabled. If you are not using the onboard LAN, set this field to Disabled.

70