Belkin PM11-UL/RAMA manual IDE Primary/Secondary Master/Slave, Capacity, Access Mode, Video

Page 58

3

Award BIOS Setup Utility

IDE Primary/Secondary Master/Slave

If you wish to define your own drive type manually, select “Manual” The drive type information should be included in the documentation from your hard disk vendor If you select ”Auto”, the BIOS will auto-detect the HDD & CD-ROM drive at the POST stage and show the IDE for the HDD & CD-ROM drive. If a hard disk has not been installed, select “None”.

Capacity

Displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk checking program.

Access Mode

For hard drives larger than 528MB, you would typically select the LBA type. Certain operating systems require that you select Normal or Large. Please check your operating system’s manual or Help desk on which one to select.

Drive A and Drive B

These fields identify the types of floppy disk drives installed.

None

 

No floppy drive is installed

360K, 5.25 in.

5-1/4 in. standard drive; 360KB capacity

1.2M, 5.25

in.

5-1/4 in. AT-type high-density drive; 1.2MB capacity

720K, 3.5 in.

3-1/2 in. double-sided drive; 720KB capacity

1.44M, 3.5

in.

3-1/2 in. double-sided drive; 1.44MB capacity

2.88M, 3.5

in.

3-1/2 in. double-sided drive; 2.88MB capacity

Video

This field selects the type of video adapter used for the primary system monitor Although secondary monitors are supported, you do not have to select the type. The default setting is EGA/VGA.

EGA/VGA

Enhanced Graphics Adapter/Video Graphics Array For

 

EGA, VGA, SVGA and PGA monitor adapters.

CGA 40

Color Graphics Adapter. Power up in 40-column

 

mode.

CGA 80

Color Graphics Adapter. Power up in 80-column

 

mode.

Mono

Monochrome adapter. Includes high resolution

 

monochrome adapters.

58

Image 58
Contents PM11-EC/RAMA PM11-EL/RAMA PM11-UL/RAMA 55600206Copyright All Rights ReservedFCC and DOC Statement on Class B Mainboard Table of Contents Supported Softwares Appendix a Using the Suspend toAppendix C Troubleshooting FunctionChipset Features and SpecificationsFeatures ProcessorOnboard Graphics Features Onboard Audio FeaturesOnboard LAN Features PM11-EL/RAMA and PM11-UL/RAMA only IntroductionConnectors ATX Double Deck Ports PC 99 color-coded connectorsOnboard Integrated Media Reader Smart I/O PM11-UL/RAMA only IrDA Interface PCI Bus Master IDE ControllerUSB Ports Intelligence Dual Function Power ButtonSystem Health Monitor Functions Desktop Management Interface DMIWake-On-LAN Wake-On-RingWake-On-PS/2 Keyboard/Mouse RTC Timer to Power-on the System Wake-On-USB Keyboard/MouseAC Power Failure Recovery Package ChecklistVirus Protection Hardware Installation Mainboard LayoutHardware Installation Supports onboard audio and onboard LANSupports onboard audio, onboard LAN, USB 2.0 and Smart I/O System Memory Hardware Installation Installing the DIM Module Jumper Settings for Clearing Cmos Data Clear Cmos Data Jumper JP2 If you encounter the followingHardware Installation On Disable VCC power Jumper Settings for Wake-On-PS/2 Keyboard/MouseWake-On-PS/2 Keyboard/Mouse Jumper JP1 Wake-On-USB 2.0 Keyboard/Mouse J13 and J14 Serial Ports Ports and ConnectorsConnecting the Serial Ports Serial PortHardware Installation Hardware Installation 2 PS/2 Mouse and PS/2 Keyboard Ports PS/2 Mouse PS/2 KeyboardHardware Installation Parallel Port Allows parallel port to operate Setting FunctionStandard Parallel Port One direction only RateHardware Installation Floppy Disk Drive Connector Connecting the Floppy Disk Drive CableHardware Installation IDE Disk Drive Connector Connecting the IDE Disk Drive CableAdding a Second IDE Disk Drive Hardware Installation Universal Serial Bus Ports 6.1 PM11-EC/RAMA and PM11-EL/RAMA6.2 PM11-UL/RAMA UP2 USB 1.1 J17 Pin FunctionFunction 5VDul Data+ Ground Key RJ45 LAN Hardware Installation VGA Port VGA PortHardware Installation IrDA Connector Pin FunctionHardware Installation CPU Fan Connector Hardware Installation Chassis Fan Connector On/Off +12V SenseHardware Installation Chip Fan Connector Hardware Installation Game/MIDI Port Front Audio J3 Hardware Installation Audio JacksMic+ Ground Mic Power AuDVcc Avcc AuDROut AuDLOutConnect a microphone to the mic-in jack Onboard Audio Jacks CN3Front Audio J3 Left audio channel Ground Right audio channel Hardware Installation Internal Audio ConnectorsAUX-in and CD-in Hardware Installation 16 S/PDIF-out Connector SpdifHardware Installation Smart I/O Connectors PM11-UL/RAMA only Optional Smart I/O Drive Memory Stick Interface Smart Card Interface Pin FunctionSecure Digital Memory Card Interface Hardware Installation Wake-On-LAN Connector +5VSBHardware Installation Wake-On-Ring Connector RI#Dimm Standby Power LED Hardware Installation Dimm and PCI Standby Power LEDsPCI Standby Power LED Hardware Installation Power Connectors +12V +5V +12V Power Connector Pin Function Ground ATX Main Power Connector Pin Function 12V Ground +5VGround +5V Hardware Installation Front Panel Connectors PWR-LED Power/Standby LED When you press Del, the main menu screen will appear Standard Cmos FeaturesBasic Input/Output System Time Award Bios Setup UtilityDate IDE HDD Auto DetectionCapacity Access ModeIDE Primary/Secondary Master/Slave Drive a and Drive BExtended Memory Halt OnBase Memory Total MemoryAward Bios Setup Utility Advanced Bios Features Virus WarningCPU L2 Cache ECC Checking Quick Power On Self TestCPU L1 & L2 Cache Swap Floppy DriveTypematic Rate Setting Boot Up Floppy SeekBoot Up NumLock Status Typematic Delay MsecOS Select for Dram 64MB Video Bios ShadowSecurity Option Small LogoEPA ShowCurrent FSB Frequency Award Bios Setup Utility Advanced Chipset FeaturesDram Clock/Drive Control Current Dram FrequencySdram CAS Latency Dram ClockDram Timing Bank InterleaveActive to Precharge Tras Dram Command RateAGP Mode Active to CMD TrcdCPU to PCI Write Buffer PCI Delay TransactionAGP Master 1 WS Read PCI Master 0 WS WriteVGA Share Memory Size Options are Enabled and DisabledVideo RAM Cacheable FB Address ConversionVIA OnChip IDE Device Award Bios Setup Utility Integrated PeripheralsIDE Prefetch Mode OnChip IDE Channel 0 and OnChip IDE ChannelVIA-3058 AC97 Audio VIA OnChip PCI DeviceOnboard LAN PM11-EL/RAMA and PM11-UL/RAMA only SC Port Address/IRQ PM11-UL/RAMA only Onboard FDC ControllerOnboard Serial Port 1 and Onboard Serial Port MS Port Address/IRQ PM11-UL/RAMA onlyUR2 Duplex Mode Uart Mode SelectIR Transmission Delay Use IR PinsECP Mode Use DMA Parallel Port ModeEPP Mode Select Game Port AddressOnChip USB1.1 Controller IDE HDD Block ModeOnboard LAN Boot ROM PM11-EL/RAMA and PM11-UL/RAMA only USB Keyboard SupportAcpi Function Award Bios Setup Utility Power Management SetupAcpi Suspend Type Suspend Mode Power Management OptionHDD Power Down Video Off OptionSoft-Off by Pwrbtn Run Vgabios if S3 ResumeModem Use IRQ PWR Lost Resume StateUSB Resume from S3 IRQ/Event Activity DetectPS2KB Wakeup Select PCI MasterResume on PCI Event Resume on AlarmResume On LAN/Ring Resume Time hhmmss Date of MonthIRQs Activity Monitoring Reset Configuration Data Award Bios Setup Utility 6 PnP/PCI ConfigurationsPNP OS Installed Resources Controlled ByAssign IRQ for VGA IRQ ResourcesPCI/VGA Palette Snoop Assign IRQ for USBPCI Slot 1 Use IRQ to PCI Slot 3 Use IRQ CPU Warning Temperature Award Bios Setup Utility PC Health StatusThese fields show the voltage of the processor +3.3V, +5V, +12V, -12V, -5V, Vbatv and 5VSBV Auto Detect PCI/DIMM Clk Award Bios Setup Utility Frequency/Voltage ControlCPU Clock Spread SpectrumCPU Clock Ratio This field is used to select the CPU’s frequency ratioAward Bios Setup Utility Load Fail-Safe Defaults Load Optimized DefaultsAward Bios Setup Utility Set Supervisor Password Set User PasswordAward Bios Setup Utility Save & Exit Setup Updating the BiosExit Without Saving Desktop Management Interface DMI Running the DMI UtilitySupported Software Using the DMI Utility Edit DMILoad DMI File Supported Software Add DMISave DMI File Hardware Monitor VIA Service PackSupported Software VIA Service Pack Installation Notes Audio Drivers and Software Applications VIA USB 2.0 Driver PM11-UL/RAMA only Graphics DriversWinbond Smart I/O Drivers PM11-UL/ Rama only Drivers and Utilities Installation Notes Microsoft DirectX 8.1 DriverAppendix a Using the Suspend to RAM Function Using the Suspend to RAM FunctionUsing the Suspend to RAM Function 101 102 Cmos battery is no longer functional. It should be replaced Error MessagesPost Beep System Error Message Troubleshooting Checklist Monitor/DisplayPower Supply TroubleshootingFloppy Drive Troubleshooting Hard Drive Hard disk failureKeyboard Troubleshooting Serial PortMainboard