Belkin PM11-EL/RAMA, PM11-UL/RAMA Security Option, OS Select for Dram 64MB, Video Bios Shadow

Page 63

Award BIOS Setup Utility

Security Option

This field determines when the system will prompt for the password

-everytime the system boots or only when you enter the BIOS setup. Set the password in the Set Supervisor/User Password submenu.

System The system will not boot and access to Setup will be denied unless the correct password is entered at the prompt.

Setup The system will boot, but access to Setup will be denied unless the correct password is entered at the prompt.

OS Select for DRAM > 64MB

This field allows you to access the memory that is over 64MB in OS/2.The options are: Non-OS2 and OS2.

Video BIOS Shadow

Determines whether video BIOS will be copied to RAM.Video Shadow will increase the video speed. Note that some graphics boards require that this option be disabled. The default value is Enabled.

Enabled Video shadow is enabled.

Disabled Video shadow is disabled.

Small Logo(EPA) Show

Enabled The EPA logo will appear during system boot-up. Disabled The EPA logo will not appear during system boot-up.

3

63

Image 63

Contents 55600206 PM11-EC/RAMA PM11-EL/RAMA PM11-UL/RAMAAll Rights Reserved CopyrightFCC and DOC Statement on Class B Mainboard Table of Contents Function Appendix a Using the Suspend toAppendix C Troubleshooting Supported SoftwaresProcessor Features and SpecificationsFeatures ChipsetIntroduction Onboard Audio FeaturesOnboard LAN Features PM11-EL/RAMA and PM11-UL/RAMA only Onboard Graphics FeaturesATX Double Deck Ports PC 99 color-coded connectors ConnectorsOnboard Integrated Media Reader Smart I/O PM11-UL/RAMA only PCI Bus Master IDE Controller IrDA InterfaceUSB Ports Desktop Management Interface DMI Dual Function Power ButtonSystem Health Monitor Functions IntelligenceWake-On-Ring Wake-On-LANWake-On-PS/2 Keyboard/Mouse Wake-On-USB Keyboard/Mouse RTC Timer to Power-on the SystemPackage Checklist AC Power Failure RecoveryVirus Protection Mainboard Layout Hardware InstallationSupports onboard audio and onboard LAN Hardware InstallationSupports onboard audio, onboard LAN, USB 2.0 and Smart I/O System Memory Hardware Installation Installing the DIM Module Clear Cmos Data Jumper JP2 If you encounter the following Jumper Settings for Clearing Cmos DataHardware Installation Jumper Settings for Wake-On-PS/2 Keyboard/Mouse On Disable VCC powerWake-On-PS/2 Keyboard/Mouse Jumper JP1 Wake-On-USB 2.0 Keyboard/Mouse J13 and J14 Serial Port Ports and ConnectorsConnecting the Serial Ports Serial PortsHardware Installation PS/2 Mouse PS/2 Keyboard Hardware Installation 2 PS/2 Mouse and PS/2 Keyboard PortsHardware Installation Parallel Port Rate Setting FunctionStandard Parallel Port One direction only Allows parallel port to operateConnecting the Floppy Disk Drive Cable Hardware Installation Floppy Disk Drive ConnectorConnecting the IDE Disk Drive Cable Hardware Installation IDE Disk Drive ConnectorAdding a Second IDE Disk Drive 6.1 PM11-EC/RAMA and PM11-EL/RAMA Hardware Installation Universal Serial Bus Ports6.2 PM11-UL/RAMA USB 1.1 J17 Pin Function UP2Function 5VDul Data+ Ground Key RJ45 LAN VGA Port Hardware Installation VGA PortPin Function Hardware Installation IrDA ConnectorHardware Installation CPU Fan Connector On/Off +12V Sense Hardware Installation Chassis Fan ConnectorHardware Installation Chip Fan Connector Hardware Installation Game/MIDI Port AuDLOut Hardware Installation Audio JacksMic+ Ground Mic Power AuDVcc Avcc AuDROut Front Audio J3Onboard Audio Jacks CN3 Connect a microphone to the mic-in jackFront Audio J3 Hardware Installation Internal Audio Connectors Left audio channel Ground Right audio channelAUX-in and CD-in Spdif Hardware Installation 16 S/PDIF-out ConnectorHardware Installation Smart I/O Connectors PM11-UL/RAMA only Optional Smart I/O Drive Smart Card Interface Pin Function Memory Stick InterfaceSecure Digital Memory Card Interface +5VSB Hardware Installation Wake-On-LAN ConnectorRI# Hardware Installation Wake-On-Ring ConnectorHardware Installation Dimm and PCI Standby Power LEDs Dimm Standby Power LEDPCI Standby Power LED Hardware Installation Power Connectors ATX Main Power Connector Pin Function 12V Ground +5V +12V +5V +12V Power Connector Pin Function GroundGround +5V Hardware Installation Front Panel Connectors PWR-LED Power/Standby LED Standard Cmos Features When you press Del, the main menu screen will appearBasic Input/Output System IDE HDD Auto Detection Award Bios Setup UtilityDate TimeDrive a and Drive B Access ModeIDE Primary/Secondary Master/Slave CapacityTotal Memory Halt OnBase Memory Extended MemoryVirus Warning Award Bios Setup Utility Advanced Bios FeaturesSwap Floppy Drive Quick Power On Self TestCPU L1 & L2 Cache CPU L2 Cache ECC CheckingTypematic Delay Msec Boot Up Floppy SeekBoot Up NumLock Status Typematic Rate SettingSmall LogoEPA Show Video Bios ShadowSecurity Option OS Select for Dram 64MBCurrent Dram Frequency Award Bios Setup Utility Advanced Chipset FeaturesDram Clock/Drive Control Current FSB FrequencyBank Interleave Dram ClockDram Timing Sdram CAS LatencyActive to CMD Trcd Dram Command RateAGP Mode Active to Precharge TrasPCI Master 0 WS Write PCI Delay TransactionAGP Master 1 WS Read CPU to PCI Write BufferFB Address Conversion Options are Enabled and DisabledVideo RAM Cacheable VGA Share Memory SizeOnChip IDE Channel 0 and OnChip IDE Channel Award Bios Setup Utility Integrated PeripheralsIDE Prefetch Mode VIA OnChip IDE DeviceVIA OnChip PCI Device VIA-3058 AC97 AudioOnboard LAN PM11-EL/RAMA and PM11-UL/RAMA only MS Port Address/IRQ PM11-UL/RAMA only Onboard FDC ControllerOnboard Serial Port 1 and Onboard Serial Port SC Port Address/IRQ PM11-UL/RAMA onlyUse IR Pins Uart Mode SelectIR Transmission Delay UR2 Duplex ModeGame Port Address Parallel Port ModeEPP Mode Select ECP Mode Use DMAUSB Keyboard Support IDE HDD Block ModeOnboard LAN Boot ROM PM11-EL/RAMA and PM11-UL/RAMA only OnChip USB1.1 ControllerAward Bios Setup Utility Power Management Setup Acpi FunctionAcpi Suspend Type Video Off Option Power Management OptionHDD Power Down Suspend ModePWR Lost Resume State Run Vgabios if S3 ResumeModem Use IRQ Soft-Off by PwrbtnPCI Master IRQ/Event Activity DetectPS2KB Wakeup Select USB Resume from S3Resume on Alarm Resume on PCI EventResume On LAN/Ring Date of Month Resume Time hhmmssIRQs Activity Monitoring Resources Controlled By Award Bios Setup Utility 6 PnP/PCI ConfigurationsPNP OS Installed Reset Configuration DataAssign IRQ for USB IRQ ResourcesPCI/VGA Palette Snoop Assign IRQ for VGAPCI Slot 1 Use IRQ to PCI Slot 3 Use IRQ Award Bios Setup Utility PC Health Status CPU Warning TemperatureThese fields show the voltage of the processor +3.3V, +5V, +12V, -12V, -5V, Vbatv and 5VSBV Spread Spectrum Award Bios Setup Utility Frequency/Voltage ControlCPU Clock Auto Detect PCI/DIMM ClkThis field is used to select the CPU’s frequency ratio CPU Clock RatioLoad Optimized Defaults Award Bios Setup Utility Load Fail-Safe DefaultsSet User Password Award Bios Setup Utility Set Supervisor PasswordUpdating the Bios Award Bios Setup Utility Save & Exit SetupExit Without Saving Running the DMI Utility Desktop Management Interface DMIEdit DMI Supported Software Using the DMI UtilitySupported Software Add DMI Load DMI FileSave DMI File VIA Service Pack Hardware MonitorSupported Software VIA Service Pack Installation Notes Audio Drivers and Software Applications Graphics Drivers VIA USB 2.0 Driver PM11-UL/RAMA onlyWinbond Smart I/O Drivers PM11-UL/ Rama only Microsoft DirectX 8.1 Driver Drivers and Utilities Installation NotesUsing the Suspend to RAM Function Appendix a Using the Suspend to RAM FunctionUsing the Suspend to RAM Function 101 102 Error Messages Cmos battery is no longer functional. It should be replacedPost Beep System Error Message Monitor/Display Troubleshooting ChecklistTroubleshooting Power SupplyFloppy Drive Hard disk failure Troubleshooting Hard DriveTroubleshooting Serial Port KeyboardMainboard