Belkin PM11-EC/RAMA, PM11-EL/RAMA Package Checklist, AC Power Failure Recovery, Virus Protection

1

Introduction

With the Suspend to RAM function enabled, you can power-off the system at once by pressing the power button or selecting “Standby” when you shut down Windows® 98/2000/ME/XP without having to go through the sometimes tiresome process of closing files, applications and operating system. This is because the system is capable of storing all programs and data files during the entire operating session into RAM (Random Access Memory) when it powers-off. The operating session will resume exactly where you left off the next time you power-on the system. Refer to “Using the Suspend to RAM Function” in appendix A for more information.

Important:

The 5VSB power source of your power supply must support

≥1A.

AC Power Failure Recovery

When power returns after an AC power failure, you may choose to either power-on the system manually, let the system power-on automatically or return to the state where you left off before power failure occurs. Refer to “PWR Lost Resume State” in the Power Management Setup section in chapter 3 for more information.

Virus Protection

Most viruses today destroy data stored in hard drives. The mainboard is designed to protect the boot sector and partition table of your hard disk drive.

1.2 Package Checklist

The mainboard package contains the following items:

The mainboard

A user’s manual

One card-edge bracket mounted with a serial port and game/ MIDI port

One IDE cable for ATA/33, ATA/66, ATA/100 or ATA/133 IDE drives

One 34-pin floppy disk drive cable

One “Main Board Utility” CD

If any of these items are missing or damaged, please contact your dealer or sales representative for assistance.

14