Belkin F1DE216C, F1DE208C DIP Switch Configuration Chart, Example, Installation Before you begin

P74290ea_F1DExxxC_man.qxd 30-10-2003 11:20 Page 14

INSTALLATION

DIP Switch Configuration Chart

	N° DU COMMUTATEUR DIP				ADRESSE BANK
1	2		3	4
BAS		BAS	BAS	BAS	BANK 00 (valeur par défaut)
HAUT		BAS	BAS	BAS	BANK 01 PRIMAIRE/SECONDAIRE
BAS		HAUT	BAS	BAS	BANK 02 SECONDAIRE
HAUT		HAUT	BAS	BAS	BANK 03 SECONDAIRE
BAS		BAS	HAUT	BAS	BANK 04 SECONDAIRE
HAUT		BAS	HAUT	BAS	BANK 05 SECONDAIRE
BAS		HAUT	HAUT	BAS	BANK 06 SECONDAIRE
HAUT		HAUT	HAUT	BAS	BANK 07 SECONDAIRE
BAS		BAS	BAS	HAUT	BANK 08 SECONDAIRE
HAUT		BAS	BAS	HAUT	BANK 09 SECONDAIRE
BAS		HAUT	BAS	HAUT	BANK 10 SECONDAIRE
HAUT		HAUT	BAS	HAUT	BANK 11 SECONDAIRE
BAS		BAS	HAUT	HAUT	BANK 12 SECONDAIRE
HAUT		BAS	HAUT	HAUT	BANK 13 SECONDAIRE
BAS		HAUT	HAUT	HAUT	BANK 14 SECONDAIRE
HAUT		HAUT	HAUT	HAUT	BANK 15 SECONDAIRE

Example:

Four OmniView ENTERPRISE Quad-Bus Series KVM Switches (F1DE208C) are daisy-chained together to control 32 computers. The DIP switch on the primary units are set to “BANK Address 00” and the secondary units are each set to a unique BANK address between 01 and 15 (BANK 00 needs to be configured for daisy-chain operation, as noted above).

Installation

Before you begin:

1.Make sure that all computers and switches are powered off and that each Switch has been assigned a unique BANK address.

2.Place primary and secondary Switches in the desired locations.

INSTALLATION

3.Connect the console monitor, keyboard, and mouse to the console ports of the primary Switch(es), as previously described for standalone units, skipping steps 5 and 6.*

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

*Dual-console support available on 2x8 and 2x16 models only.

4.Connect the computers to the Switch as previously described for standalone Switches.

Hosts 1 & 2	Hosts 3 & 4	Hosts 5 & 6	Hosts 7 & 8
Hosts 1 & 2	Hosts 3 & 4	Hosts 5 & 6	Hosts 7 & 8

14 15