Step 2
2.Connect a network cable between each of your PCs and the Gateway Router
Plug a Network cable into the Ethernet port on each of the other PCs and then to one of the ports on the rear of the Gateway Router labeled LAN.
Note: It does not matter which LAN ports you connect your other PCs to, but be sure that you are not connecting any of the PCs to the port labeled WAN.
3.Connect a Network Cable between the Router and your Cable or DSL modem.
Plug a cable into the port labeled WAN on the Belkin Gateway Router and connect the other end of the cable to the Cable or DSL modem’s Ethernet port.
NIC | NIC | NIC | NIC |
BELKIN
ROUTER
CONNECT TO LAN PORTS
CONNECT TO
WAN PORT
CABLE OR DSL
MODEM
12