Belkin F5D5230-4 manual Glossary of Terms

Page 45

Glossary of Terms

DHCP - Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network.

DNS Server Address - DNS stands for Domain Name System, which allows Internet host computers to have a domain name (such as belkin.com) and one or more IP addresses (such as 192.34.45.8). A DNS server keeps a database of host computers and their respective domain names and IP addresses, so that when a domain name is requested (as in typing "belkin.com" into your Internet browser), the user is sent to the proper IP address. The DNS server address used by the computers on your home network is the location of the DNS server your ISP has assigned.

DSL Modem - DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone lines to transmit data at high speeds.

Ethernet - A standard for computer networks. Ethernet networks are connected by special cables and switches, and move data around at up to 100 million bits per second or megabits per second (Mbps).

IP Address - IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies a single, unique Internet computer host. Example: 192.34.45.8.

ISP - Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations.

ISP Gateway Address - (see ISP for definition). The ISP Gateway Address is an IP address for the Internet router located at the ISP's office. This address is required only when using a cable or DSL modem.

LAN - Local Area Network. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an office). Your home network is considered a LAN.

43

Image 45
Contents Port Cable/DSL Gateway Router Table of Contents Introduction Integrated 10/100 4-Port SwitchNAT Firewall Security Built-in DhcpPackage Contents Web-Based User InterfaceSystem Requirements Product Descriptions Rear Panel WAN Link StatusBelkin Docking Options Belkin Docking RingWall Mounting the Belkin Gateway Router Is my IP address Static or Dynamic? Sharing Your Internet Connection Is Done In 4 Easy StepsStep Does my Internet service provider use PPPoE?Is my connection bound to a MAC address? Does my connection have an assigned host name?My IP Address is User Name Assigned by your ISP Password Service NameStep Write your IP Configuration settings here Connect Your Equipment Basic Parts Required for Each Computer on Your ListNIC Step Setup your computers for networking Installing the Belkin Soho Networking SoftwareConfiguring Your Computers Using Belkin NetSetup Step Step Step Step Step Step Verify That Your Computers are Networked Step Accessing the Web-Based Setup Utility Configuring Your Router if Your Provider Uses Dynamic Step Step Step Step Configuring Your Router if Your Provider Uses PPPoE Step Click MAC Cloning/Entry. The following screen will appear DMZ Settings Intrusion Detection On/OffSecurity Log Virtual Server Settings Special Application Settings Client Filter Settings NAT Enable/Disable Services LAN Dhcp SettingsSet Time Zone Change PasswordRemote Management UtilitiesRestore Defaults ResetUpdate Firmware Problem Possible Cause/Solution TroubleshootingBetween the Gateway Router Make sure your computers Make sure the coaxial cable Glossary of Terms Glossary of Terms Port Cable/DSL Gateway Router F5D5230-4 Product SpecificationsCE Declaration of Conformity Warranty, FCC, CE StatementP73794