Belkin F5D5230-4 manual Set Time Zone, Change Password, Remote Management, Utilities

Step 4

Set Time Zone

If you are using any of the time-based functions of the Router such as Client Filtering, you will need to set the time zone you reside in for the function to work properly.

Change Password

The Router ships without a set password. It is not necessary to enter a password.If you choose not to use a password, leave the space blank. If you do choose to enter a password, be sure to write it down in a safe place. To set a password, enter it into the "New Password" field and confirm it in the next field. To change your password, enter your existing password and then enter the new password twice.

Remote Management

Any computer on your network can access the Router's built-in setup utility. The Remote Management feature allows a computer outside of the network to access the setup utility. When enabled, only the computer at the specified IP address can access the setup utility. Entering 0.0.0.0 will allow access by any computer.

Utilities

Access the Utilities screen by clicking on "Utilities".

36